These large bookcases are designed to work with the rest of the Storage Bed Collection to create storage in your child's room. Position the shelves at table height to use as nightstands as well! Special thanks to Amy and Steve for sharing their photos.
The side towers can actually be modified to any width, preferably less than 36" to keep shelves from sagging. This tower can be used in other rooms too, and for other purposes.
We've got the middle shelf at nightstand height. Drill a hole in the back of the plywood and you can put a lamp or alarm clock in there. Or better yet, cabinet lighting. Speaking of cabinets, someone asked on our Facebook Page about converting some of these components to open wall kitchen cabinets. You would not need any modifications other than a board (probably a 1x3) flat with the back, on the inside back top (and probably the bottom too) so that you have something sturdy to screw the cabinet to the wall with. Oh, and standard cabinet height is 30".
This side tower is composed of 1x12s and 1x2s. The back is 1/4" plywood.
3 - 1x12 @ 8 feet long
3 - 1x2 @ 8 feet long
Please see cut list in PDF.
Please see the instructions in the PDF attached to this post.
We apologize if there was an error in this plan. Please help us out and report any errors here.