Build your own toddler solid wood bed inspired by Pottery Barn Kids Catalina Toddler Bed! This do it yourself free plan is easy to build and can save you hundreds off the retail!
2 - 2x2 @ 8 feet long
3 - 1x6 @ 27 1/2"
2 - 2x2 @ 24"
1 - Beadboard Paneling @ 23" high x 30 1/2" wide cut to fit
2 - 2x2 @ 10"
2 - 1x6 @ 50 3/4"
4 - 1x2 @ 11"
4 - 1x2 @ 24 1/2"
2 - 2x2 @ 51 1/2"
15 - 1x3 @ 27 1/2"
Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck!
With the header cut, go ahead and drill Kreg Jig pocket holes on ends and attach to legs as shown in diagram.
Now add the slats! I found that closer slat spacing is better for crib mattresses because the mattresses themselves are so flimsy. Plus, a little foot could slip through wider spacing.
Using 1x3 boards - which are about $1.50 each - you will only need 5 total 1x3s. The difference between wider spaced slats and narrower spaced slats is about the cost of a fancy cup of coffee.
It is always recommended to apply a test coat on a hidden area or scrap piece to ensure color evenness and adhesion. Use primer or wood conditioner as needed.
We apologize if there was an error in this plan. Please help us out and report any errors here.