Have been wanting to build this for 6 months now and just havnt had the time. Finally completed it!
I made some small changes to the design, different trim layouts, different dimensions, and went with a plank look for the back of the hutch instead of a solid peice of 1/4" plywood.
Built from Plan(s)
$500.00. This price includes wood, stain, and hardware.
Estimated Time Investment
Weekend Project (10-20 Hours)
Type of Wood
1 coat of Minwax Weathered Oak, then 1 coat of Minwax Special Walnut.
Recommended Skill Level
Wed, 12/31/2014 - 15:16
This looks great. I love the
This looks great. I love the finish you chose.
In reply to This looks great. I love the by handmadewithash
Wed, 12/31/2014 - 17:00
Thank you very much for the comment! =).
Happy New Years as well!
Thu, 01/01/2015 - 08:47
this looks beautiful, love the stain!
In reply to gorgeous! by ehays216
Thu, 01/01/2015 - 22:48
Thank you ehays216! Ive looked at your Farmhouse Storage Bed a few times.. Have always wanted to try the Steel wool/Vinegar trick.
Ana White Admin
Thu, 01/01/2015 - 12:07
In reply to Stunning! by Ana White Admin
Thu, 01/01/2015 - 22:49
Thank you very much Ana White
Thank you very much Ana White Admin!
Fri, 01/02/2015 - 23:35
Do you mind me asking what dimensions you used?
In reply to Beautiful!!! by Smjackson82
Sun, 01/04/2015 - 16:07
Of coarse! I used the same
Of coarse! I used the same height and depth dimensions, just shortened the width by 9 inches.
Sat, 01/03/2015 - 07:40
Great job! The love how the color turned out. May I ask where you purchased your backdrop from? And what size it is?
In reply to backdrop by timberandsoul
Sun, 01/04/2015 - 16:09
Thanks a lot timberandsoul!
Thanks a lot timberandsoul!
Photo was taken on an empty wall in my living room, Which is currently a light gray wall. thought it looked boring so I did a quick switch of backdrops in PS. I just typed in brick wall in google.
Sun, 01/04/2015 - 11:30
How to achieve that finish?
Hi Justin. Did you use any special technique between the two coats of stain to achieve that effect. Thanks. Andy
In reply to How to achieve that finish? by AndyH
Sun, 01/04/2015 - 16:10
Got your email Andy,
Got your email Andy, hopefully you got mine!
Sun, 01/04/2015 - 16:27
What type of wood did you use, home depot/lowes regular pine or some specialty wood ?
In reply to Material by Singhs
Sun, 01/04/2015 - 18:36
Hey Singhs, I went with Home
Hey Singhs, I went with Home Depot Regular Knotty Pine. Cheap and easy to work with.
Mon, 01/19/2015 - 13:03
Stain color and plank backing
I love this! Can you give me information on how you modified the plan to achieve the plank backing and the stain color?
In reply to Stain color and plank backing by juddgirl2
Sat, 01/24/2015 - 13:08
Sure! the plans call for 2
Sure! the plans call for 2 solid sheets of 1/4 plywood for the backing.. I simply just ran the plywood through a table saw at 5.5" wide and brad nailed it the back. =)
The stain is weathered oak and let sit for 15min. Then right away special walnut and let sit for 15 min.
repeat until desired colour. let me know if you have any more questions!
Sun, 01/08/2017 - 07:33
How many coats did you have to do to achieve this look? The weathered oak looks so light...and gray.
Sun, 05/17/2015 - 19:40
Attaching Sideboard to Hutch
What was your strategy on attaching the sideboard to the Hutch. I haven't seen where there is any instructions or conversation around this. What and how did you accomplish this and/or is there anywhere to go that discussed this that helped you.
Sat, 03/12/2016 - 16:28
Did you seal or do a topcoat? If so what kind? Thank you-what a great job!
Mon, 06/27/2016 - 12:35
What type of hinges did you use for your cabinet doors?
Tue, 07/05/2016 - 00:19
This inspired hutch/sideboard is absolutely divine! What an awesome job!