The BEST Floating Shelves

Submitted by Ana White on Sun, 10/20/2019 - 17:35
Difficulty
Beginner
| Print this plan

I have been building floating shelves for ten years.  I've built floating shelves all different ways - this is my very BEST floating shelf tutorial.

It's easy to build, even for beginners, and uses only a drill and a brad nailer (no pocket holes).  You can build and finish it on your workbench - and installing the floating shelves is easy too!  Step by step plans with diagrams and materials lists.

white floating shelf diy tutorial

Floating shelves add an architectural element to your home, and also give you space to store and display favorite things. We love wood floating shelves, white floating shelves, kitchen floating shelves - whether your style is modern or farmhouse, floating shelves can work in your home!

In this tutorial, we make floating shelves as easy as possible to build. 

  • You won't need any special tools or a ton of building experience to whip these floating shelves out
  • You can build, paint or stain, right in your garage, then just hang on the wall
  • You can easily customize the length and depth to fit your needs
  • Beautiful in both a painted or stained finish

Floating Shelf Strength

To test the strength of my floating shelves, I placed 10 pound weights per every foot of shelf and left overnight.  

floating shelf strength

The floating shelf did not change and remained sturdy and strong.

Video Tutorial

For my most recent floating shelf build in our bathroom, I filmed the process and created a video tutorial.  There's lots of tips and tricks, so please watch before you build.

How to Make Floating Shelves

Dimensions
diy floating shelves dimensions
Floating shelves can be made to any length. We recommend between a 1x4 and 1x10 for the shelf tops, depending on the desired depth of the shelf.

Preparation

Shopping List

  • 1x4, 1x6, 1x8 or 1x10 shelf top board in desired length of shelf, minus 1-1/2"
  • 1x4 long enough to go all the way around your 1x shelf top board
  • 2x3 or 2x4 - inside support pieces
  • 1/4" plywood, same size as your shelf top board
  • #8 2-1/2" to 3" long self tapping wood screws (like these from Home Depot)
  • 3/4" and 1-1/4" brad nails 
Tools
Tape Measure
Pencil
Safety Glasses
Hearing Protection
Drill
Circular Saw
Brad Nailer
Power Sander
Level

Instructions

Step 1

Cut your shelf top board to the desired length of your shelf, MINUS 1-1/2".

Cut 1x4 end pieces to match the width of your shelf top board.

Use glue and 1-1/4" brad nails to attach the 1x4 end pieces to the shelf top board.  All outside edges are flush.

Step 2

Cut 1x4 front and back pieces to match the shelf length.

Attach front of shelf with 1-1/4" brad nails and wood glue.

For back of shelf, for extra strength, you can attach with 2-1/2" self tapping screws and glue, or use nails.

Step 3

Cut 2x boards to match the width of your shelf top board.

For 2x3s, set inside the shelf, making sure there is 1/4" gap on top for the 1/4" plywood.

Attach from back with glue and 2-1/2" screws and from front with glue and 1-1/4" brad nails.  

If using 2x4s OR 2x3s are too big to leave the 1/4" gap, turn the 2x board flat side up, and attach set down 1/4" from the top (as done in the video) with screws on the back side and 1-1/4" brad nails on the front side.

Place a support about every 12" and one on or near each end.

Avoid placing supports where studs in walls are located in the final hanging location.

Cut 1/4" plywood with a circular saw or tablesaw.  Make sure it easily fits inside the floating shelf.  Paint or stain the floating shelf and the 1/4" plywood panel and let dry.

Step 4

Locate studs in wall and hang the floating shelf through the back 1x4 board into studs in the walls using 2-1/2" or longer self tapping screws.

If you are attaching the 1/4" plywood to the bottom, hang the highest shelf first, complete the next step, than hang the next lower shelf.

If you are attaching the 1/4" plywood to the top, hange the lowest shelf first, complete the next step, than hang the next higher shelf.

Step 5

Place the 1/4" plywood panel inside the floating shelf and use the 3/4" nails to secure.

Touch up paint or stain as needed to finish the floating shelf.

Help Improve This Plan

We apologize if there was an error in this plan. Please help us out and report any errors here.

Comments

Kristin Bradley (not verified)

Wed, 09/05/2012 - 15:22

I love these! I'm looking for shelves to put above my desk that can hold a few books, paper, and office supplies. Do you think I could adjust this plan to 10 inches instead of 7 inches? I think 7 inches may be too narrow for what I need it for.

jtcdesigns (not verified)

Mon, 11/26/2012 - 12:07

This is an awesome idea.. and actually similar to a permanent design I’ve made for a floating computer desk… which is extremely destructive and permanent.. but worth it 100%.

I was wondering though since its only a 1×2 support.. how much weight can go on it? I’ll be making 2 or 3 48″ long shelves. My plan is to put books on them, preferably all of my computer and photography books and possibly light picture frames.

I’d probably rip down a 2 x 4 to a 1 x 3 making the shelves a bit thicker but offering a little more support and I can stuff 3 screws into each stud which should be a total of 3 studs.

What are your thoughts as far as its strength and it sagging?

kongk

Tue, 05/21/2013 - 04:47

you are in reality a excellent webmaster. The website loading pace is incredible. It seems that you’re doing any distinctive trick. Also, The contents are masterpiece. you have performed a wonderful task on this subject!
Relationship with T-Lad Web

Ana White Admin

Fri, 04/10/2015 - 11:51

Just click on the "printer friendly version" or "pdf version" just above the "comments" section for plans.