Rustic Coffee Table
Because we needed this coffee table for a small living room, we scaled the length down a bit from the plans. It worked really well.
Because we needed this coffee table for a small living room, we scaled the length down a bit from the plans. It worked really well.
My wife and I originally saw this Ana White planked sideboard and knew it was exactly what our dining room needed! We had the perfect spot for it! The plans were generally easy to follow and it was actually my first time installing drawers! It turned out amazing and we all love it! We love the added storage it provides for dishes and other kitchen accessories.
I built this project after my wife saw a brag post from one of Ana White's followers. She was excited to regain some of her kitchen counter space by moving the Keurig machine and Vitamix blender. The build was completed in a single weekend.
My 6 year old son and I made this doll bed for my daughter. It's the cutest little bed. Right now she puts her "Bitty Baby" doll in it but it will be great for when she's older and has an American Girl doll, too. And, it gave me a chance to make a little quilt. That was fun.
It was a quick and easy project! Thanks, Ana!!
I altered the plans a bit so this would fit along the wall where we wanted it. I basically shortened the width of the steps. I left the storage under the hinged 1st and second steps but I put in a shelf style cubby under the top step. This worked out to more useable space for us. I used cheap wood and just plained them down. I think I spent around 300 dollars including paint. But I also used a full sheet of plywood on the back as well.
My second Ana project. Only modifications I made where to use 2x10 for side rails with a cleat system. Heavy duty bed rail hardware purchased from Amazon....Used 2 coat stain process followed with matte poly to finish
Was in the market for another bed but the prices were ridiculous. Ran across Ana White's site and fell in love with all of the projects and decided to build it myself. It's been standing strong since 2020. Thanks for all of your knowledge.
My niece, who visits often needed a place of her own, for drawing, painting, playdohing, and of course the token lemonade stand. This is is, she loves it. When she's here, one weekend a month, it comes out, into the sunshine, so she can do her little girl activities. I left the top so I can resand if there are any accidents, and now it has a coat of poly sprayed on. I did make this project intermediate, due to the very tricky screwing that needs to be done not to go thru the top. I did use my Kreg Jig
I didn't use one of your plans for these shelves but wanted to share it here since I learned how to build because of you! These were really easy to put together and only cost $100!!! I have the step by step plans on my blog.
Stephanie
My version of this project using so advanced joinery and under mount self closing draw guides
This step stool is my first project made from Ana White plans. It is perfect for my almost 2 year old daughter and it's become her new favorite toy! She likes to turn it upside down and ride in it like a boat :)
I love how simple and sturdy it is. It easily holds my weight (180 lbs), and I look forward to many years of useful fun from this great project. This was also my first project that incorporated beveled and angled cuts, but once I got started, it wasn't as intimidating as I initially thought.
I had some leftover pieces of 1x10 and 1x3 pine boards from building a sidecar crib, so this was a perfect was to use the scraps. I used a table saw for cutting the 1x10s. My miter saw isn't large enough to accommodate 10 inch wide boards, but it was perfect for the 1x3s.
After assembling the stool the first time, I took it back apart and ripped the top down to 8 inches wide. I thought the stool had a tendency to tip with the full width of the 1x10.
Can't wait to build more of these! For the next one, I'd like to try cutting half circles out of the bottom of the legs with the jigsaw instead of straight cuts and trying some decorative cutout handles on the sides as well.
Thanks, Ana!
Outdoor chairs turned out beautifully! Love Ana’s easy to follow plans.
Paige Kimbrell
This is a television stand/bookcase I built at the request of my wife. I used red oak plywood, red oak lumber, and the backing is 1/4" birch sheeting. It is put together with trim nails, wood glue, and countersunk wood screws. I used wood plugs to fill the screw holes. I marked it as intermediate due to the miter cuts on the trim.
Tue, 02/21/2012 - 09:59
This is a nice looking TV stand! Is there any way you could do a sketch up of it?
I built this and then ordered storage baskets that fit to the size. I built it exactly to the plan except I did not make the top flush to a back wall and I added decorative trim. I think adding trim really adds a nice look to this project.
The tower was super easy to build and took hardly any time. The most time was spent on the finishing work (sanding and painting).
I needed a new desk for my office workspace in the garage. I wanted something inspired, and that would BE inspiring to me as I sit at it. So, I made this chalkboard surface woodworking planning desk with mismatched legs. I love that the legs are mis-matched. LOVE IT. IT would make type a people squirm, but me. Nope, I love it. I quick made some set of sawhorse legs, and a box leg. Attached a 3/4 piece of plywood cut the the size I wanted. Stained the legs dark brown, and rolled on 3 coats of chalkboard paint on the top. Boom!! And the best part of this design, when it gets messy, I just sand it down. And clean it up again with chalkboard spray paint.
Build exactly from the plans. Stained in dark walnut.
Built mom a queen sized bed when she decided to downsize. It was lots of fun to build.
Laura Hatfield
Built this over a couple of week nights. I used the basic bookshelf plans available on this site.
It was fun!
I do have a couple of observations though:
1- Sand all pieces of wood BEFORE you cut them, to the desired lengths! Make sure the wood is nice an smooth. So much easier to do with big pieces, that can be balanced on a good support! Especially important when using the cheapest pine available!
2- Take your time, double check measurements, and follow the assembly directions. (Yes.. I made a mistake on the assembly part... at least it's on the back, and no one can see it)
I did change the width to fit my wall space, and I did add adjustable shelves (1 fixed shelf, to help hold the whole thing square). (I used a piece of peg board to place the holes for the shelf supports). Pretty neat! I also added a couple of extra shelves. (I still needs some paint) I needed the extra storage for organizing the stuff we need in the family eating area.
I also changed up the top finishing details. I mitered the corners, and layed the 1x2's flat, offset by .75 of an inch. It gives a nice look.
For our 2 1/2 year old granddaughter.