Farmhouse Bed (Twin Size)

Submitted by Ana White on Mon, 07/15/2019 - 12:21
Difficulty
Intermediate
| Print this plan

If you are looking for a classic farmhouse style bed for your child's room, this is the project for you. Featuring simple styling, large headboard and footboard tops, substantial legs, sturdy siderails, and the option to go with or without a boxspring, this beautiful bed is definitely worth your sweat! 

Step by step plans with diagrams and lots of readers submitted photos.  Check out all our Farmhouse Bed plans here.

farmhouse bed twin sized boy room painted blue
farmhouse bed with trundle

Reader submitted photo by KELLI224

This plan has been updated.  If you need the old plans, we have them available here.

Dimensions
farmhouse bed dimensions diagram ana white plans
Fits twin sized mattress

Preparation

Shopping List

3 - 1x6 @ 8 feet long

1 - 1x6 @ 4 feet long

2 - 1x4 @ 8 feet long

2 - 4x4 @ 8 feet long

1 - 2x2 @ 8 feet long

4 - 2x4 @ 8 feet long

2 - 2x6 @ 8 feet long

2 - 1x10 @ 8 feet long

6 - 1x3 @ 8 feet long

2 - 1-1/2" x 1-1/2" L brackets

2 - 3" long straight mending plate brackets

Common Materials
2 1/2 inch screws
1 1/4 inch finish nails
Cut List

HEADBOARD

  • 7 - 1x6 @ 30"
  • 2 - 1x4 @ ~38-1/2" - measure and cut to fit
  • 2 - 4x4 @ 54" 
  • 2 - 2x2 @ 30"
  • 2 - 2x4 @ ~45-1/2" - measure and cut to fit
  • 2 - 2x6 @ 47-1/2"

FOOTBOARD

  • 7 - 1x6 @ 15"
  • 2 - 1x4 @ ~38-1/2" - measure and cut to fit
  • 2 - 4x4 @ 21"
  • 4 - 2x2 @ 5-1/2" 
  • 2 - 2x4 @ ~45-1/2" - measure and cut to fit
  • 2 - 2x6 @ 47-1/2"

BED FRAME & SIDERAILS

  • 2 - 2x4 @ 80"
  • 2 - 2x4 @ 8-1/2"
  • 2 - 1x10 @ 75"
  • 12 - 1x3 @ 38-1/2" - measure and cut to fit

 

Tools
Tape Measure
Speed Square
Pencil
Safety Glasses
Hearing Protection
Drill
Circular Saw
Brad Nailer
Power Sander

Instructions

Step 1

Cut the 1x6 headboard boards with a miter saw (preferred) or circular saw with straight edge.

Lay out as shown in diagram.

Measure the overall width.

 

POCKET HOLE USERS: You can join the 1x6 boards together edge to edge with 3/4" pocket holes and 1-1/4" pocket hole screws.

Step 2

Attach 1x4 on top and bottom, with all outside edges flush, with 1-1/4" brad nails and glue.

Make sure the panel is square (not a parallelogram) by taking outside corner diagonal measurements and adjusting until the two opposite diagonals measurements match.

POCKET HOLE USERS: Drill two 3/4" pocket holes on each end of the 1x4 boards.  Attach to the 4x4 legs with 1-1/4" pocket hole screws.  Then nail the 1x6 boards to the 1x4s.

Step 3

Use 2-1/2" screws to attach the 2x2 cleats to the inside back edge of the 4x4 legs.

POCKET HOLE USERS: Skip this step.

Step 4

Attach panels to the 2x2 cleats with 2-1/2" screws and 1-1/4" brad nails and glue.

POCKET HOLE USERS: Skip this step.

Step 5

Measure and cut the top 2x4.  Attach with 2-1/2" screws and glue.

Step 6

Place 2x6 on top of 2x4.  Make sure all outside edge overhangs are even.

Screw on with 2-1/2" screws and glue.

Step 7

Repeat the same steps for building the footboard panel.

Step 8

If using the cleats for attaching, leave a space in the cleats as shown for accepting the bed frame in later steps.

Step 9

Attach footboard panel as you did the headboard panel to the legs.

Step 10

Repeat steps to finish top of footboard.

Step 11

Attach 2x4 cleats to the 4x4 legs with 2-1/2" screws.

The spacer blocks are not attached and are just used as guides for setting up the bed.

Step 12

Place sidreails on cleats and attach with glue and 1-1/4" brad nails.

Also recommended is attaching with an L bracket and a straight bracket at tops.  Pocket hole users can use a 3/4" pocket hole and 1-1/4" pocket hole screws.

Step 13

Lay slats in bed frame, space evenly.  Screw down with 2" screws or 1-1/4" brad nails.

Comments

Spcschaffer

Sun, 09/09/2018 - 04:16

The method you used on this bed for the use of a box spring, can it be used with the other sizes of farmhouse beds? 

khardy1986

Sat, 01/26/2019 - 20:50

I already have a trundle I'd like to use. It's 13 inches high. Can anyone tell me how much space is available under the bed if it's made as exactly stated in plans. I've never built anything like this before and I wasn't sure where this measurement was on the plan. Thank you anyone who can help please.

In reply to by khardy1986

Brian Famous

Mon, 01/28/2019 - 18:53

Judging by the diagrams, it looks like the legs for the footboard are 21" long.  The side rails are 1x10s (9.5" high") and mounted to align with the top of the legs on the footboard.  So 21 minus 9.5 would be 11.5" high if I am interpreting correctly.

 

Hope this helps.

r0jas_jr

Wed, 06/05/2019 - 17:52

I'm a little lost here. Currently building this project but I have come to a speed bump. How do we attach the headboard to the legs? On the queen size farm house bed it takes 2x2s, here it doesnt ask for them. A little help please?