Modified Shed - Door on short side
I had very little clearance on the long side of the shed, so I opted to put the door on the short side. Thanks for the plan, it was a great starting point for my project.
I had very little clearance on the long side of the shed, so I opted to put the door on the short side. Thanks for the plan, it was a great starting point for my project.
This was such a fun project!! Kudos to Ana White for a great design!! We made several changes, including the dimensions; 10ft X 42-43 in (left the outside edge raw. Table top is 1.5" thick American Walnut with a semi gloss clear poly, and the base is milled 1.5" thick poplar, stained dark walnut. The pedestals also have threaded rods vertically drilled through the center beams (one top and one bottom) and used 3/4" dowels sunk into the base and riser for added structural stability. Finally, the mortise and tenon runner on bottom used dowels to hold it in place and the top is removable using my own fabricated wooden cleats to attach the top in an old style removable way. All in all; although this was certainly not the cheapest (about $1,500 all things considered) or simple (although comparable materials and craftsmanship would cost about 3x what I spent); this table is bullet proof and beautiful!! Thanks for the inspiration Ana!!!
I built this table for my wife as Christmas gift. I love how it turned out. I used a wood burner to write on the bottom some lyrics from our song from our wedding. It’s humbling to know we will sit and have dinner at a table I made. Thanks Ana for the great plans.
Fri, 01/04/2019 - 13:38
This is an absolutely gorgeous table! It is so stunning! Thank you so much for sharing! Ana
This sectional was made by my daughter @bluebellesdesign for my husband and me about 6 years ago. She used the 2x4s from a torn down fence. As you can see, it has aged well and the cushions are needing some love but it has been a tremendous addition to our outdoor living.
Wed, 09/28/2022 - 10:37
That is awesome, so happy you've been enjoying it for all these years!
My hubby and I built this for a fundraiser. A few challenges along the way, but lessons learned for future projects!
Wed, 06/25/2014 - 05:40
Never saw your comment, sorry! Thanx so much for the compliment!
Great console table.
We just got the table up into the kitchen area today! (1/5/19) So glad he finished this! Next will be a bench or maybe two. Thank you Ana for the plans to make this! It came out very nice and everyone who I’ve sent the pics to have given my husband praise! (I also included the photos and the link to this site in my blog! Whoo! Positive vibes!)
The project took him a little bit since he works FT
Sun, 01/06/2019 - 16:49
This is just beautiful! And only $77!!!
Thanks so much for sharing a pic!
We built our little guy a twin bed when he was 1. 4 years later, he's outgrown it, and Ana White to the rescue! Not only were we able to upgrade the size to a full mattress, but the storage cubbies are a huge plus as well. Very easy to follow plans, took us about 3 days to knock it out.
Minwax Jacobean finish.
Sat, 10/08/2022 - 07:59
Love the look of this, awesome job! Thank you so much for sharing.
I loved that I used strapping, or furring strips, for this bead. The topper wood is a 2X4, but every other 8" piece of wood cost between $1.25 and $1.99 each. Yeah! Of course, for that price, you have to know you will be sanding the heck out of it. We had a metal frame for this bed but I wanted a headboard. Because it was going against a wall with a 45 degree angle, I had to make it a lot shorter than I wanted. I made it just tall enough so both pillows, when stacked on top of each other, did not fall off the back. I just love it.
Fri, 04/13/2012 - 15:33
I am intrigued by this finishing paste you speak of. Could you tell me more?
Wed, 04/25/2012 - 17:51
If you can't find the minwax that debandtom25 used, you can also get a nice paste wax from Johnson Wax. I know that's what's on my finishing shelf, and like deb, I love it.
Although I know the original idea for this plan was to save space, I ended up building a bigger version. I loved the design and overall look but wanted something with more counter space. My husband does property maintenance, and is always coming home with scraps of wood he salvaged from work. I dug through his wood pile for 90% of the wood I used on this project. I repurposed most of the accessories and bought the rest (including the hardware) from the dollar store. I spent a total of $38 on the entire project! I absolutely love how it turned out and can't wait to see the look on my daughters face on her birthday!
Mon, 09/16/2013 - 15:40
Adorable! The additions are great. Makes me wish I was a little girl again so my Dad could build one for me. I guess I'll just have to be happy with building one for a future grandchild of my own.
This project took me a little longer to finish but I'm happy with the results. I used the plans to establish the size and carcass, but changed up the style on the inside by putting a shelf on one side and drawers and glass/wine holders on the other. For wood I used 3/4" Maple plywood and common board pine. The color is minwax Jacobean and for protection I applied wipe on poly satin finish. This gave it a nice hand rub look.
Spaced out the boards to allow airflow; did a sliding barn door and metal roof. Thanks for the plans!
Wed, 10/19/2022 - 08:23
This is totally awesome, way to think outside the box! Thanks for sharing.
We bought a house with a death trap for a back step. Until we get to re-doing the entire back patio area I needed a temporary solution to keeping the kids from toddling off the back 'ledge'. I modified Ana's plans to make a nice border around the step so kids can't fall off when they are coming and going from the backyard. We had left over cedar fence slats from when we did our fence last spring...PERFECT and FREE!!!!!
This was a very simple pot rack and spice shelf using 1x3 for the pot rack and 1x4 for the spice shelf.
Spice Shelf is 7ft and the most complicate part was cutting the uprights for the large baseboards in our house. I used a profile gauge but this wasn't quite enough. Eventually I did some sanding on the spot to get the best fit. Having gained my addiction from Ana for Kreg Jigs the shelves and mounting pieces were added with pocket hole screws. By placing the screws on top or on the bottom I was able to avoid the necessity of plugging holes. Shelf spacing is completely custom for our needs and the large bottom portion will receive a cross brace in the front to hold in our shopping bags. Butterfly bolts were used to mount the shelving through the lathe and plaster walls.
The pot rack is simply a 1x3 ladder where I used a 1x3 for the spacing between the rungs. Large bottom to hold pot lids. Hooks were hand bent using a jig to ensure they were all the same. Mounted to the old brick chimney in the kitchen using TapCons.
Both items were finished in MinWax Mahogany and had one coat of of poly to keep the rustic feel.
Length of project depends on drying times.
Any questions please let me know!
So appreciative for the plans. This was one of the bigger projects I've taken on but I had so much fun with it. A client of mine actually sent these plans to me because she wanted this exact bed with headboard. I was a little apprehensive at first because I haven't normally done a lot of custom work but it was a lot of fun.
To be honest, not my favorite build but my daughter loves it. Just one of those projects plagued with problems
Ana's plans are so easy to work with. This greenhouse was build with all recycled materials from our home build, except for the corrugated plastic (total cost approx. CAN $1,000). I did have to make it a little bit smaller as the area that was leveled was a bit smaller than planned. I'm planning to add raised beds inside, add a solar panel so that I can have light in the evening and a fan during the day. I'm planning to attach some gutters and a rain barrel.
This is my second project, based on Ana's plans (first one: https://www.ana-white.com/community-projects/indoor-firwood-console). Next, I'm planning to make the fancy X farmhouse table and bench with storage. Stay tuned.
The husband kept complaining that the washer and dryer were too low without pedestals. Well, no problem! I've got plans from Ana's site.
I measured to fit our machines and followed the plans. But somewhere along the way I screwed up. I think it might have been how I attached the legs with the "L" brackets. My legs were sitting away from the base, not flush with it. Anyhow, the way to correct my mistake was to attach the moulding along the sides, front and back of the base, not around the legs. But I don't mind the way it looks. Just an FYI: there was a lot of waste with the sheets of MDF, but that's not a problem because I'm using it in another project as I write. :)
First, I put on two coats of primer. Then I decided I wanted a splash of turquoise in the basement, so I mixed a blue and yellow paint until I got the color I desired. After a few coats of paint, I distressed and then decided to tone down the color a bit with a Valspar glaze. I put on two coats of poly, hoping that would be enough to withstand the inevitable water on the pedestal. I thought the piece was screaming for a quote, so I painted "The most memorable days usually end with the dirtiest clothes."
And you think with the new height he'd help me with laundry a bit more? Yeah, I think not.
Tue, 08/30/2011 - 18:58
I love the color! I'm usually not a fan of quotes on furniture but this is really cute and it fits perfectly! Great job!
Sat, 09/10/2011 - 17:44
What a great idea, and I love the color choice! We have front loaders and bought the drawers for the bottom. While they are decent storage, they tend to travel open at times. This has so much more personality and adds a real built in look to the laundry area. I'm sure you saved quite a bit doing it this way over drawers. How is it holding up to the moisture and vibration of a the washers? Keep those great ideas coming.
In reply to Very snappy! by BethG (not verified)
Tue, 09/20/2011 - 18:38
I've been waiting for my machines to "walk off", but the pedestal is holding up well. I made sure to add poly to help protect it from the moisture. So far, so good.
Mon, 10/10/2011 - 18:43
I love the way the moulding goes all the way around. Love the color and the quotes!
Our original sofa and loveseat turned out so well that my parents asked that we build them a set. It was our first time converting the plan to a single seat so I was nervous on how it would turn out, but it looks great!
Fri, 09/20/2013 - 15:10
Beautifully done! I love the colors and how they play off of each other. I just finished building the loveseat and two chairs. Couldn't be happier. I'm getting requests too, but I'm still worn out from building mine.
Comments
moosmani
Tue, 09/10/2013 - 10:15
Thanks for posting! I plan
Thanks for posting! I plan to make this shed. Yours turned out beautiful!