Solid wood tilt out trash cabinet or recycling cabinet plans. You'll love the step by step instructions and diagrams, shopping list and cut list.

Preparation
2 - 1x12 @ 6 feet long
2 - 1x3 @ 6 feet long
2 - 1x2 @ 4 feet long
1 - 1/4" plywood or similar 24" x 14-1/4"
Narrow Hinges (the cheapo kind with flat headed screws)
Knob or Pull
Wire or toybox lid support hinge to keep the door from opening all the way to the floor
2 - 1x12 @ 29 1/4"
1 - 1x12 @ 18"
1 - 1x12 @ 16 1/2"
2 - 1x3 @ 16 1/2"
2 - 1x2 @ 18"
1 - 1x3 @ 18"
DOOR
2 - 1x3 @ 25"
2 - 1x3 @ 13"
1 - 1x12 @ 16"
1 - 1x12 @ 11-1/4" - cut at 45 degree angle
Instructions
Step 1
Use either a Kreg Jig or 2" screws or brad nails to build your box as shown above. The bottom shelf is 2 1/2" from the bottom, at the top. So leave 1 3/4" gap underneath the bottom shelf. Check for square.
Step 2
Step 5
Step 6
Step 7
Step 8
Hinge the door to the cabinet. For our tilt out trash cabinet/recycle center, we didn't even have to worry about a magnetic catch - the weight of the tilt out base keeps everything closed nicely.
However, you may need to install either hardware or a chain to keep the tilt out door from opening all the way and bruising your toes.
Comments
Bmyers
Mon, 11/14/2011 - 10:40
Modification
Do you by any chance have this plan modified with a drawer on either on the top or bottom?
Bmyers
Mon, 11/14/2011 - 10:42
Modification
Do you by any chance have this plan modified with a drawer on either on the top or bottom?
Guest (not verified)
Tue, 12/13/2011 - 19:59
Information
Hi,
I am looking for plans to make a wooden tilt out trash cabinet with a drawer on top for my family. Do you happen to have such a plan or know where I could find them.
Thanks!
Tom Jastram
1205 E 68th St N
Sioux Falls, SD 57104
Guest (not verified)
Fri, 03/16/2012 - 21:22
Hamper
Could this be modified to be a clothes hamper?
koufax (not verified)
Wed, 04/04/2012 - 16:07
raised panel doors?
You show raised panel doors on the pictures of your recycle bin holder but the plans don't mention this or show it. What is the story behind that?
cmack (not verified)
Wed, 06/20/2012 - 10:47
After lots of hunting, I
After lots of hunting, I finally found the video for raised panel door!
Here's the link
http://ana-white.com/2011/05/raised-panel-cabinet-doors
cmack (not verified)
Wed, 06/20/2012 - 10:48
After lots of hunting, I
After lots of hunting, I finally found the video for raised panel door!
Here's the link
http://ana-white.com/2011/05/raised-panel-cabinet-doors
Nicole Camacho (not verified)
Wed, 08/08/2012 - 21:43
I think I missed something....
How do you keep the door from falling straight down and hitting the floor, thus spilling the contents everywhere? Did I miss a step somewhere?
Lanna (not verified)
Thu, 08/23/2012 - 12:52
Double Tilt-out Cabinet
Hi Ana. First I'd like to say how great it is to have come upon your site. I currently have a trash cabinet nearly just like this, and am excited to see your instructions since we're needing a new one. However, I'd love to know if you have plans/instructions for a double cabinet like this. Something to where each tilt out on its own, but share the same structure/top/etc.
Thanks!
Lanna
Jake
Tue, 11/13/2012 - 18:35
Build a Raised Panel Door
Ana you mentioned in a plan for a trash can cabinet that you would post a video on building a raised panel door. Have you done it yet or is there another place to go to get some ideas? Thanks a bunch for all of your help.