Community Brag Posts

My wife loved the x-pattern of the eatherly sofa and also wants an L couch for our deck. Still have to sand and paint but that is her job :)

Wanted a nice big table, but couldn't find one in local stores. Decided to build one after seeing a small tiled table at Home Depot. This is my first project like this. I am a network engineer not a carpenter, but the table turned out great.

I made it wider than the plan and use it in my bathroom for storage. Its pine and cedar.

We decided to adjust this plan by removing the stretchers on the bottom. We knew we wanted to use the ends of the table for seating fairly regularly without adding a leaf on the end. The lack of support doesn't seem to have any effect on the sturdiness of the table. This was a super fun (and first woodworking) project! Can't wait to knock out the bench!

I built these picket fence planters with my husband. They were very easy to build. I can use them all year around. I’ll add flowers in the spring and summer and mums in the fall and Christmas trees in the Winter. I’m definitely building more for my back porch. Happy building! - Celines

I built this caddy to celebrate a 4th birthday party for a sweet little girl. I used pine scraps, painted it with some leftover pink paint, and then created some name artwork and a little logo with her initial. I made the art on my computer (in Adobe Illustrator) held up a piece of notebook paper to the screen and traced it with a pencil. Then I held it on my caddy and used a mechanical pencil with the lead down to press the indent into the wood. Filled that in with a silver paint pen and traced it with a fine tip black sharpie. Then filled each cubby with a large mason jar from Walmart (about 50 cents each) and filled them with art supplies. It turned out so cute! And it's a great way to use up some scraps.

Modified plans for a king. 

Made of pine and cedar. 

Took about a week of evenings. 

First Ana White project for a beginner woodworker are two baby doll cribs.

Built this 6ft 2 pedestal table.  Moved the legs closer together on the benches so that they could slide under the table.

I made half of the Rustic X Console table. It was an easy build until it was time to make the X's. They were only hard because I was using a circular saw and carpenters square and I couldn't get my lengths right. I ended up with a lot of short pieces and I was glad I ended up buying more than enough 2x2's. If I had a miter saw it would of been a lot easier (I have one now).

Clara table and 4 dollar stackable chairs. I used Minwax Early American on the table and a variety of paint colors on the chairs to keep it fun. I also used select pine on the chairs which increased the cost but cut down on sanding time. I also routered the top edge of the table to create a smoother edge.

Large Banquette Bench with Storage (12’x7’)

It was a big project, and my husband did all the main stuff!
I still have to paint the inside. Since we aren't building a deck yet, we are putting it on some pavers. We bought 40 12x12 pavers and will push that out on in the next couple of days. I also will eventually attach a window box with plants. I'm planning on painting a couple of the inside walls with chalkboard paint.
It was seriously worth every amount of time and energy. If you are thinking of doing this, do it! You can, it's a great plan. Thanks Ana for the plans!

This project was made for our four year old son, after viewing an article from a known magazine he came over charmingly stating "Daddy can you build me this in a dinosaur theme??" So of I went searching and found the plans online here (Thanks Ana!) @ a cost of approx $400 and about 40 hours of work it was built. He loves it and loves to show it off to friends and family, as it has also been a hit within our neighborhood. We built it using white board wood, sanding everything down, and using just semigloss polyurethane to seal and protect the wood. All materials where obtained from either Home Depot or Lowes.

I made this Farmhouse X Table from Ana's plans with the adjustment of adding a breadboard to each end (a perpendicular piece of wood). This table was my first woodworking project ever! Now I am hooked ;) I have made a bench to match. Both are stained with minwax English Chestnut and finished with minwax fast-drying polyurethane, semi-gloss. Now I just have to figure out the rest of my chairs! Thanks Ana!

This is a TV console I made using Anna White’s techniques, which make woodworking achievable even for the novice builder.

I Loved the idea of this table! It is in the kids' living room/game room. This room is usually cluttered with blankets for friends, games, game controllers and so on! I was thinking about building a storage chest for their coffee table, then I saw these plans! It is perfect! The boys even use it to clean up...WITHOUT ME FORCING THEM! Oh yeah!!!!

I wanted my table to appear to have three drawers instead of two, so I modified a bit. I also opted out on the breadboard ends and just made the top boards a little longer.

After looking at sofas in magazines and fliers, I decided I wanted to build one. For the quality (or lack of) at the price we could even dream of, it just didn't make sense to purchase one if I could build it. There are still a few little adjustments I may make as time goes on, but overall, I'm happy with the way it turned out! The pillows I made definitely added the finishing touch it needed!

It's a full 8 foot sofa designed with plenty of space underneath for storage! My plan was to build two wooden boxes on casters for the kids to use as toy boxes, but I think plastic totes will work just as well and much lighter and easier to clean! I drew up the dimensions and plans to fit what we wanted and went from there. The frame was the easiest part; took about a day. The cover and cushions on the other hand were quite a challenge. The sewing involved in this project was HUGE; took a little more than a week just for that. The pillows took an evening.

Thanks for checking out the project! Whatever you have in your heart, you can do!