Community Brag Posts
Benchright Coffee Table
Part of the Benchright collection. This was easy to make and it turned out so much prettier than I imagined. I love it!
Birthday See-Saw :)
I built this for my daughter's 4th birthday. The kids love it!
California King Farmhouse Bed
This was my first wood working project, and it came out great!
Please note - the buy list leaves out the 2x10s needed for the sides.
Mobile Workbench with Drawers
I recently had a workshop built and I have been trying to now work on the furniture for it. My first project was this workbench inspired by the plans "garage workshop workbench". I added drawers on each side and will probably end up adding a shelf in the open area as well after letting my kids finish decorating the top. It's already a nice addition and I may build a smaller version for my garage. I added casters and have the option to roll the table around or have it stationary.
Tonie
Family Organization
I loved the post from Lady Goats on the PB inspired daily system and the modifications from debandtom25!
I knew this was an answer to clean up our counter, before items even make it to the counter this is right at the door when you walk in our house!
I didn't use a picture frame but used plywood with molding of my choice for the "frame." I selected paint at Home Depot and just purchased the sample paint in three different colors. The wording was done on a computer and used as a stencil (cut the letters into contact paper, stuck contact paper on and painted).
Final coat in Rust-Oleum clear gloss.
Comments
Reclaimed clubhouse
I did this all with fence panels. The dimensions were determined by my 2x4's. I trimmed the pickets to size and overlapped them to give it a real siding look. Then I power washed it and let the kids have fun, we have not finished decorating but we will and I am sure it will change over time since their decoration of choice is chalk. I say a weekend because you need to inventory what lengths of wood you have to plan it out and the smaller cuts for the siding can be time consuming. This didn't cost me a thing I had screws left over from building a deck. I built each wall then screwed them together and attached siding making sure to only screw into the facing wall so I could disassemble if needed.
Arhaus inspired bookshelf
Awesome rustic book case that was inspired by an Arhaus table. It is a fun twist on a traditional book shelf with tons of character!
Skiki Bar
I'm calling this a Skiki Bar which is a word play on Tiki bar. It is based on the Simple Rolling Cart design. I used my own dimensions according to the width of cross-country skis. I have a large number of these old skis for projects. They are sold for very cheap at garage sales, etc. The top of the bar is made from boards that I had removed from an Adirondack chair set, which I had made Ski chairs with. So those were already stained and they matched the stain I used on the pine 2x4 frame of this Skiki Bar. I already had a pair of wheels laying around so I only had to buy 2 more of the same size. The pictures were taken before I installed a shelf on the bottom with some scrap plywood I had in my garage.
I estimated the time to factor in how long it takes to stain all the boards and let them dry.
On the left edge I installed a Ski bottle opener I made.
I estimated my cost on what I bought that I didn't already have. I bought the pine 2x4's (also a 1x4, 1x6), Construction Screws, Stainless Steel Screws (For attaching skis), and 2 wheels.
I already had: Skis, Bar top boards, 2 wheels, deck screws (attaching the bar top boards from underneath), stain, clear coat, wood glue and tools.
My next project is to make Ski bar stools. Thanks for having a look at my design!
Oak Slat Bench
I turned some old oak shelves that I got from an estate sale into a 3' wide Scandinavian slat bench.
Pat Besong
Painters shelf
Whew! I am a total novice. I have never used a saw in my life, but with a little bit of instruction from my husband i was able to do it almost completely on my own. Even as a beginner i could have finished it in a full day, but i was trying to work on it during my daughters naps so it took almost a week!
Raised Garden Beds
I used the basic Raised cedar garden bed plans with a few alterations. I made them different sizes, stacked one on top of the other for some dimension in my garden and secured them together from in inside.
Comments
Using Commonly Lost Garage Spaces for Storage
I recently spotted a little gem in the garage - a little space in between the garage doors. It was perfect for building a modular system of small French cleat box shelves. I made them all using scrap wood. I even had extra scrap wood to make a battery charging station in another narrow gap on the wall. You can read all the details about my latest storage adventure on my blog:
http://www.justmeasuringup.com/blog/using-commonly-lost-garage-spaces-for-storage
I'm on high alert for more areas like this that get overlooked easily, and am just waiting for more inspiration to strike!
Playhouse Loft Bed with stairs
This was my first major project I built from this site. I would say that I am a beginner builder with only a little experience building small things. This was my first big project and I built it piece by piece over the course of a few months. This was my 4 year old's birthday gift. I bought my first Kreg Jig Jr. (I already want the master system!) and got a lot of confidence by doing this project. It was pretty straight forward, although the painting and sanding took way longer than I thought! I pretty much stuck to the plans and did not change much. The only thing I did was add hand hole cut outs on the stairs and I chose not to cut out a side window because that side was against a wall anyways. I am SO excited about this project and will be posting MANY MORE builds from here.
Comments
Sun, 10/21/2012 - 22:14
Great job dude! I bet your
Great job dude! I bet your daughter loves it. I am going to start building one for my nephews this week, hopefully it looks half as good as yours!
Conner side table - first build
My first build. Built two of these for less than $50 and four hours. Finished the top with dark brown Polyshades and the bottom with off white satin paint. Borrowed my dad's mitre saw and and drill. Can't wait to do more.
Benchright coffee table
Built entirely of reclaimed pallet wood & shipping crate
X-style coffee and end table
My mother wanted something to match the table she got for under her TV, and I found the plans here for the x-style coffee table and small end table to be very fitting. The crosses were pretty difficult with just a hand saw, but with the help of my brother in law we got these done in a few days.
Outdoor Farmhouse Table
I liked the design of the barnyard dinner table and needed a table on the patio for family get togethers. I modified the table plans to seat 10 and made it bar height. I also finished the top vs planks. Came out great.
Kevin Cole