Farmhouse Coffee Table
Chunky farmhouse coffee table made for Christmas Gift.
Chunky farmhouse coffee table made for Christmas Gift.
I had fun with this one. I was in a race to complete 4 major things before entertaining a group of 30 people in our home. My wife was searching Craigslist for existing pieces. I love to build things so I had to intervene. This pine desk/table was preceded by craftsman wainscoting, the hutch and buffet on this site, and a large framed mirror.
I went by the plan pretty much exactly. I made it 6 feet long. I used middle grade pine from Menard's, glue, brad nails, and screws. My finish process was min-wax wood conditioner, min-wax special walnut stain, and a per-catalyzed lacquer satin clear coat.
Total buy, build, sand, finish was around 8 hours.
I would love to build for you. To your exact specifications. Message me.
Mon, 12/30/2013 - 16:22
How did you attain such a smooth surface on the desk top? Worried about gaps between boards interfering with writing surface but yours looks great. What's your secret.
Built this from Ana's plans over a weekend and spent a few nights painting/staining/finishing. We decided to use a true quarter sawn red oak for the top. This is not a cheap wood (~$180) for the top alone, but I wanted it to be solid and thick. It is extremely hard so you will not want to use this if you don't have the necessary tools, like a table saw. It is usually purchased rough cut, which means the width can range in size by inches. You will need the table saw with a sharp blade in order to cut it down to matching widths. For the stain we used a General Finishers gel stain in Java from Woodcraft. That was followed with a General Finishers Gel topcoat. This is an excellent topcoat as we have 0 scratches in almost 6 months of regular use. My wife painted the base in a Cream Puff color from Behr I believe with a dark stain glaze, followed by a wax coat. This is a solid table that cost a fraction of what this would be in the stores. Most of our friends think we bought it! Thanks Ana!
Mon, 09/14/2015 - 09:02
Bautiful work!! The colors you picked are great! This has gone on my list of projects, it actually cut line hahahaha I have two questions, where did you get the sofa and the area rug? That rug is perfect for my bedroom! The colors are just perfect!
Tue, 01/26/2016 - 07:42
Sorry for the late reply! The sofa is from Norwalk Furniture and the rug from rugsusa.com
Mon, 01/25/2016 - 15:01
I'm sorry for the late reply on this! The sofa is from Norwalk Furniture and the rug from rugsusa.com.
Thank you so much for the plans! My wife is extremely happy with the results and so am I. I am in the process of adapting these plans to make a matching end table. Once again, thank you!
Had all my motorcycle gear throughout the garage and wanted to pull it all together. The single locker plan was a perfect blueprint with just some adjustments to height and width. Thank you!
Love the simple look of this collection! This was my first table to do. I will be doing more...such a great and sturdy table. The wood is absolutely beautiful stained too!
Two little girls we know recently celebrated their 1st birthdays, 4 months apart. I thought chairs would make perfect gifts. I finally got around to finishing both chairs around the time of the second girl's birthday. The other one was rather belated. The parents didn't know I was making it so it was still a nice surprise. My own 1 year old rather enjoyed testing them out.
I've previously made one of these full size chairs for my 8yo. but for these I changed the measurements to be smaller and easier for a one year old to sit on. I made the seat 28cm high and adjusted all the other measurements to suit. I enjoy using Sketchup so resizing the plan was a good excuse to use it again (I used an old ikea chair we had on hand as a guide for the sizing.)
I primed and painted the wood used for the slats before I cut it to size. This was so much easier than trying to paint in between them. Filling the screw holes was a bit of a chore and I'm not totally happy how some of them were still rather visible under the paint. A bit more practice needed I guess. Finishing took quite a while because of all the drying time. Chose to distress them to help disguise any bumps and marks they're likely to sustain. I discovered there is a fine line between distressing and distressing too much.
Really happy with how they turned out. Thanks for the fantastic plans!
Mon, 09/02/2013 - 06:43
Great job on the chair! What did you use to het the name on there so perfect!!
Thanks,
Sun, 09/22/2013 - 21:12
Thanks, I printed out the name in the size & font that I wanted and traced over it using a ballpoint pen/dull pencil which leaves a slight indent. Then paint the outlines and fill it in. There's a great tutorial over at http://thatsmyletter.blogspot.com.au/2012/08/h-is-for-handpainted.html
Sun, 10/12/2014 - 18:30
Love the use of the 1x6 instead of slatted for the back and the addition of the name takes it to a whole new level. So glad I saw this before making them for my littles. Btw, love the font you used for Brianna, so pretty. Well done!
Mon, 11/03/2014 - 16:14
Beautiful work on the chair! What type of paint finish did you use?
Thanks!
This was my first woodworking project.
Super easy, super fun
Adapted from the Harriet Chair found at ana-white.com, this simple and comfortable pine chair is equally at home in the kitchen and home office. Built to last, it can be custom designed for small or tall customers alike. The chair pictured here is finished with red mahogany stain and matte varnish.
The Gallery Shelves were just the thing to refresh our front room.
These shelves were absolutely perfect for hiding behind my daughter's bedroom door. Space is tight in her little room, and that 27-inch stretch of wall was not being utilized.
These shelves were so simple and took no time at all. I think total cutting and assembly time was about an hour for all four.
I put them together using pocket holes, so the order of assembly was a bit different than the original plan. I screwed the sides to the bottom, then added the front beam, and attached the back last, using pocket holes and filling them with spackle.
I can't wait to find more nooks and crannies to build creative storage from plans on this site.
THANKS!
Anna
More pics and details on the blog post:
http://lassothemoon.typepad.com/lasso_the_moon/2013/07/emmas-secret-lib…
We wanted to transition our two year old out of the crib and skip the toddler bed and this worked perfectly.
I made the cuts over a lunch hour and assembled in one night.
If you have never used a pocket jig, just practice on a piece of scrap. Also make sure you consider how you will attach the rails before beginning. Depending on what you use you may want to make the headboard more narrow to accommodate for the rails not being flush with the insides of the posts.
I made steps out of the scraps from the outer rails and the slats. Our little guy loves it!
I found a barn door headboard in a rustic furniture store years ago. They wanted $2700 for a Queen size....no thank you! I followed the plans for the Farmhouse King Bed and added cross pieces for barn door look using instructions from the Brookstone Headboard. I cut the legs at 56” to add some height and I set the bottom of the back panel at 18” above the floor to make sure no gap is seen with our thinner, memory foam mattress. I couldn’t be happier with our headboard and the total cost, including screws & stain, was about $150! Boom! Thank you Ana White for sharing plans! I’m working on the Mini Farmhouse Bedside Table now & feel like I can build anything! I would highly recommend Power Pro Premium Interior screws (no splitting or stripped heads, no pre-drilling & they counter-sink great in soft wood). For the 4x4 posts I used GRK UberGrade R4 multi-purpose 4” screws, which had the same quality, all from Lowe’s.
We had an awkward family room with a second front door which rendered the layout less functional than it could have been. My sister mused, "I wonder what would happen if you took out the second entry and added built ins?," and this project was born. With a 4 year old and a 2 year old and limited tools and workshop space, we were excited to find ShelfHelp, which allowed us to create custom built ins at a fraction of the cost and time they otherwise would have required (utilizing the "Frameless Built-Ins, All in One Method" plan) . Including the custom soapstone top that we had made from a local shop that was advertising remnants, the project came in under $1000, and we were thrilled with the results. SO MUCH TOY STORAGE, an unobtrusive TV, and a much more functional layout. Thank you, Ana White!
Wed, 04/06/2022 - 09:55
WOW, this is gorgeous, thank you so much for sharing and trusting us with your huge project!
These were so simple, and SO FUN to build! These were done all while having a schools out party, and an evening outdoor movie with kids running wild! I really liked building them, and can't handle how cute they are! I used pocketholes and also brads and glue. Pretty sturdy, but I think I will use harder wood for them next time. We went to a cabin over Memorial Day, and we ended up leaving them for the owner because we thought they were so cute on her deck! My finish was super easy and fast because I wanted them finished so I stained, and dry painted then set them in the front to dry out in the sun, sealed with poly and TADA, DECK CHAIRS!!
For this project we needed a piece quite a bit smaller than the original plan called for. We ended up keeping it simple by only altering the width. We kept the height and depth the same in order for the x's to keep their angles. So we shortened the width and only did one shelf section instead of two! Vwala...our first project-complete!
After moving to our new home, we needed an entertainment center to house our TV. I had build a DVD/Bookcase several years ago and I wanted the entertainment center to match design-wise. I was amazed how similar the Smith Media Wall is to the bookcase I built years ago--simple, clean lines with the moulding along the top.
I adjusted the plan to fit our TV and went with one cabinet door on each side instead of two. I also used some leftover beadboard for the cabinet panel inserts. I broke the first rule of carpentry and in a rush to finish, mismeasured the side hutch in comparison to the side base cabinet. (I actually had the correct measurements, I just made a calculation error when reading the plans I quickly drew up. Usually, I'm meticulous with plans, but with so many projects to do, I rushed these plans and hopefully learned from my mistake)
Tue, 07/28/2015 - 16:43
This is a beautiful build, and if you hadn't mentioned the measuring error, I doubt if I would have noticed it. Good job!
Very sturdy table and benches!
Starting the slow process of creating a backyard oasis. Was looking at Adirondack chairs, and plastic ones seemed to have issues with breaking, and don’t want to spend $150 per chair or more for wood. Found this post, and just completed my first chair. I used some of my wood decking that I just replaced, so probably $30 per chair, so really happy. Very comfortable as well, so thank you for the time to figure out things.
Mon, 04/11/2022 - 10:43
Great use of material and it looks fantastic too, thanks for sharing!
Comments
Ana White Admin
Wed, 02/09/2022 - 07:07
Love it!
WOW this looks awesome, thanks for sharing!