Modern Bench Turns Shoe shelf
For our first project, my boys and I decided we wanted to build a shoe shelf for our front foyer. We loved the design of the modern slat top bench so adapted it slightly to fit our needs. Here's how it turned out.
For our first project, my boys and I decided we wanted to build a shoe shelf for our front foyer. We loved the design of the modern slat top bench so adapted it slightly to fit our needs. Here's how it turned out.
So I made this a couple weeks ago. I used 2x12 for the top and 4x4 for the feet and legs. This was my first project and it came out ok. The feet need some work. The plan called for feet to be angled but unless you have a band saw just cut the 45' for the feet.
I built this during quarantine. Dark walnut on the top, and pure white paint ok the base and doors.
I wanted to get my nasty pot scrubbers out from behind the kitchen faucet, so I thought this was an ideal solution. I substituted the paper towel rack for a length of vinyl rain gutter. I cut a piece of a baking cooling rack for the bottom of the rain gutter, so the wet pot scrubbers would not sit in dampness. I also made the rain gutter removable, because I knew it would get nasty and need to be washed occasionally.
kuyaLars
A friend of mine was looking for extra counter space, and asked me to build a kitchen island, but with a few modifications. He wanted space on the end to slide two stools, so I used fewer slats. After I finished the build and the first coat of paint, he decided it was 3" too short. So, I got creative and used some stair spindles to create decorative feet! I'm actually really glad for the mix-up, because the feet give it so much character. I layered on the paint by starting with a coat of plum, then a coat of cherry, and followed it up with a glaze mix with oak stain. Then three coats of spray on poly and it was done.
This is a bench that I have built for a friend of mine to fit exactly in her entry way. I made it in the spirit of the Pottery Barn furniture that she already has. I used regular Douglas Fir found at anywhere lumber is sold.
The bench was put together using mostly 2-1/2″ pocket hole screws. I use my Kreg Pocket Hold Jig to drill the holes, but any jig should work.
See the link for detailed instructions.
I loved building my Coffee Table, thank you Ana White! I built mine to be 42" long and kept all the other dimensions the same, (but didn't do the X's). I also installed leveling feet. I stained it Minwax's Early American, and used 3 coats of Polyurethane and applied everything with a rag. I used 2" Corner Brackets, spray painted with Rustoleum Metallic Charcoal. I bought the baskets from Michaels.
Built this using the Ana White plan. Construction was done in less than a day using leftover lumber from other repairs around the house. Painting and varnishing took multiple days for the paint and varnish to dry and cure though.
Used pocket screws - as shown in my diagram - to hold the pieces together.
The family has enjoyed using the desks and if you stack one on top of the other, the bottom one creates a shelf also. Will make a few more to share.
Thanks for sharing the plans.
This was our first project using the Kreg Jig K4 pocket system. We wanted a simple and affordable project to learn how and practice using this tool. I also wanted a narrow buffet table to fit in our formal dining area, which I could never find in stores, so making one seemed appropriate.
The only difference from the original plans is that the sides are 37 1/4" and the back is a 1x14 @ 58 1/2".
Thank you for this simple yet elegant console table plan!
This was the second coffee table I've built using Ana's plans and I'm so grateful for this website! The plans are easy to follow and adapt for truly "custom" furniture and a fraction of what you would pay for similar pieces in a store or online.
I adapted the plans to make the table a little shorter and I only used four 2 x 6 boards for the table top instead of five so that it would fit in with our couch a little better.
I saved a little bit of money by using furring strips for the 2 x 2s and I opted for 3/4" plywood for the bottom shelf.
The Kreg Jig (i get by with the little R3 but I'm hoping to upgrade someday soon) is invaluable for projects like this.
Tue, 09/09/2014 - 07:36
Hello,
I'm looking to scale back the project to fit into my living room - do you mind sharing your final dimensions?
Thanks!
Plans use was the Bailey Console Table.
This was build for the #igbuilderschallenge hosted by @desertwoodwrks and judged by @anawhitediy and @davidsheinkopf.
I used two old queen sized bed frames for the legs and stretchers, welding them together with a Lincoln Weld Pak HD Flux core wire feed welder. With a little practice, anyone can do this easily!
I used poplar hardwood instead of pine for durability. Stain is Minwax Jacobean, with 4 coats of Deft Clear Satin Spray Lacquer on top.
Added a face frame around the doors, and made then inset flush mount drawers. The left drawer also has a false bottom, with hidden storage beneath the lift off tray.
Recycled bed frames were used for the legs and stretchers (both front and back) and them painted with Rustoleum Black Satin Finish Spray Enamel,with the lacquer on top of that for protection.
This challenge was so much fun to do, and it was a real blast seeing the creativity of everyone else involved! I can't wait for the next one.
Follow me on Instagram : @amanteafinewoodworks
After building the computer desk from Shanty@Chic's design. We decided to make a simple bench that matches. It is about 36" long (which is long), but we wanted both kids to be able to sit in front of the computer at the same time.
Cost was low except more Minwax stain and a 1"x3" for the trim on the bottom. Most was built from scraps desk material and we have a ton of extra wood we saved from the trim carpenter when we built our house last year.
This is my first project using a Kreg Jig. Went together in about half the time of previous projects. I love it. Thanks for sharing the plans!
I made this book case for my daughter to replace an existing book case. I the design is a little different from what I found.
We build this bunk bed from the Rustic Modern Bunk Bed plans. We finished it with one coat of primer and one coat of Dunn Edwards Swiss Coffee. This project was made easier with a Dewalt 12'' sliding compound miter saw, Kreg K4, and a speed square for every aspect of the project.
Slatted four posted bed and I adore my new bed!
Taking the top of solar footlights & glued them to the top of a painted lamp cover then add the fishing line to hang & presto chango! You now have a hanging solar lantern for under $7!
King size Farm House Bed. Project took about 30 hours of work (1-3 hours per night). Built with White Board and Pine woods. Pine was used for the head and foot boards slats. We made the mistake of making our bed head board and foot boards 6 inches too wide (mental brain fart). So our options where to scrap or figure something out. After some thought we decided to place a step on the running boards using a 1X3 (pine). The effect was stunning. Also added "vine" vertically to the end of both foot and head board, it looks better in person (you'll have to zoom into image). We took care in sanding all boards, staining using Wood preconditioner, then Minwax Colonial Maple, and then Semi-Gloss Minwax Polyurethane. We love the sturdiness of the bed! as our friends that have seen it have continuously repeat "It's beautiful, this is how furniture used to be made" couldn't agree more!
Fri, 04/25/2014 - 08:45
This is a great bed. I love the idea of a step. It looks professional.
Over the winter we decided to upgrade our daughter's bed from a single to a double. We wanted her to be involved in the concept and design. Here is what we came up with!
More builds/projects/tool info can be found at my YouTube page. Would love to have you stop by!
Not much to say apart that some internal measures were different (!?) and that I used treated wood and covered everything with recyclable plastic.
Oh yeah, of course.... Thank you Ana!!
My entry was filled with a huge armoir/bar, that made the entire house feel cramped...So, I moved it and replaced it with this beauty!
I wanted a shelf, so I used a 1x12 trimmed with 1x2's for this.
I modified and went with 5 drawers instead of 4...I have 5 boys, this way they each get a drawer for their stuff.
I also alternated finishes on the top boards to create a striped look.
Notice something missing? The hardware for the drawers! I cannot make up my mind on which ones to buy. ;) Any suggestions would be greatly appreciated!
I like the straight lines of this piece, so I want the pulls/knobs to be somewhat contemporary.
Mon, 08/05/2013 - 09:22
Love the way this came out - have you deceided on hardware yet? I suggest this http://www.restorationhardware.com/catalog/product/product.jsp?productI…
in oil rubbed bronze