Community Brag Posts

Absolutely loved this table when I saw the plans and knew it was exactly what we were looking for near our front entrance.  I got the wonderful idea from another builder on here (Kiely54, thanks!) who modified the drawer faces and used the amazing drawer pulls. My wife loved the drawer pulls so much we hunted them down at our local Menards.  This is the first time I have ever built a piece with drawers.  I was absolutely terrified about making and fitting the drawers, but it wasn't nearly as bad as I thought.  I have now learned how to do it and now I don't feel so limited about the pieces I build.  We modified the size to fit our area and we absolutely love the finished product!

So these were the first things I built from the site. Will say the table took me around 2-2.5 hours and it felt like the chair took alot longer. I think the pocket hole way for the table was much faster IMO then all the screws for the chair. Anyways, just wanted to say thank you Ana for the plans and the wonderfull site! I feel like I could knock these tables out without blinking an eye now, great step by step process.

Made from leftover antique heart pine flooring. I used a biscuit jointer for tight joints. Glue up takes some time, but I think the results justify it.

First attempt at building a large piece of furniture. I had success with other smaller projects from Ana White so convinced myself I could do this too! I used 2x6 red oak boards for the top and pine 2x4's for the frame. Love the way it turned out.

We made the doll bunk bed for our daughter's Christmas gift. We didn't modify the plan at all and the bed is a great way to use scraps since many of the wood pieces are pretty short. If I made another bunk bed I think I would paint the boards before assembling the bed because I think we spent twice as much time painting as we did building!

This project was for a garage entry and is perfect for what was needed. As described in the plans, it took about 9 hours. We chose to use Home Depot instead of Lowe's for materials. Some cuts were not done correctly and some missing. Went back once to complete. Rented a Nailer which was huge! Well worth it. The plans did not include how to attach the lockers to the benches, so we used 'L' brackets. May have missed those directions somewhere? We had orignally planned to make 3 benches and 4 lockers. Decided to use an existing bench in place of the middle Braden bench and worked just fine. Would not use pine again, but only plywood. Many pieces were warped and difficult to get lockers square, and we picked out the lumber! We chose not to add the drawers to the benches, but will add canvas bins for shoes.

We needed some privacy from the neighbors and to hide their pool equipment and voilà!!! 4 2x4 for the frame 22 1x4 for the slats

I used the plans for the cfaft table top and shelf but changed a few things. On the left side table i made a shelf/cubby hole for wrapping paper and some small shelves I think it came out good!

I used the farmhouse doll bed as inspiration, and ran with it. Mostly I made it up as I went along- but it's sturdy, and cute. I still need to finalize the cushion, but I'm happy with it overall.

Loved this! It was really easy. Can't wait to build more!

Clara table with one piece top and chairs modified with 2x2 legs and one piece seat.

My 11 year old is a girlie girl and has been asking my wife and I for the American Girl Star Armoire cabinet for 2 years. I found a similar plan here on Ana-White's Plan page. I decide to use a little nice quality wood (Aspen) instead of just a clear pine wood. It turned out nicer than even I could have expected.

My daughter got this for her 11 Bday this past Sunday and has already filled the cabinet with all her special AG Dresses. I added my own twist by putting a 1/4" Chalkboard back on it so she can use it to play school with her AG Dolls.

I have a couple people interested in making one for them for Christmas. :)

My next project will be one of the bunk-beds featured on Ana's website.

I loved this plan. It fits perfect in our daughter's bedroom as a night stand.

Farmhouse doll bed with adorable bedding made

This man crate is a gift for a co worker who is retiring. We'll put all his keepsake gifts in here and he'll have to open it with a crowbar. :) The dimensions on this were adjusted to the size of 17" long, 12" wide, and 10 3/4" high (about the size of a case of copier paper). It is made with 1/2" birch plywood and poplar craft boards. I chose to use the hardwood plywood since I found out folks would be signing it, and it's much easier to write on this with a ballpoint pen than on regular plywood. Plus, less sanding for me to do ! ;)

To keep it from being so heavy when it's filled, I substituted 1/4" plywood for the top and bottom, and left the trim off of the ends. I arranged the pieces so the trim on the front & back covered the cut ends of the 1/2" plywood.

The lettering was traced on (it's "Stencil" font, in 105 pt size, printed from Powerpoint) using a ballpoint pen to dent the surface, then a black Sharpie pen to outline. Hubby thought it looked nice just with the letters in outline, and that's shown in the picture.

Also on this one, I made a little gift tag with some clip-art, and mod-podge'd it to the bottom.

I needed some furniture for a summer tv room ( cooler downstairs) I was making. These sidetables and tv stand are loosely based off Ana's work.