Community Brag Posts

I was just about to sketchup this plan and Ana beat me to it! YEAH! I made two yesterday afternoon.

We made this piece 7' tall rather than 6' tall so that it would go well in our dining room, leaving the cabinet doors the same height but adjusting the upper shelves to fit.

I modified the plans from the favorite Bookshelf to fit my laundry baskets. Once I'm done painting, this will be installed in my master closet. (Finally all the dirty laundry off the floor!)

I spent lots of time looking at all the photos posted on this site of people's amazing renditions of "Grace's Play Kitchen." I was so inspired by everyone's creativity! I found an old wooden play stove at a flea market and decided to make a matching sink. I took Ana's plans to the carpenter at the wood shop on the military base where I am stationed and asked if he could help me build a matching piece. We spent about 4 hours one Saturday building the sink. The carpenter had so much fun helping me, he suggested I build a matching refrigerator. So that was created in another couple hours the following Saturday. I did as much of the building as I could, but definitely had some help from the carpenter as I'm a novice. (Thanks, John!) I made the curtain and matching towels, but found the apron and chef's hat on Etsy. (Thanks, "SweetApronzNCupcakes"!). The play kitchen is in my kitchen, so my two year old daughter can pretend play while I'm working on meal preparation. Thanks again, Ana and all the creative folks who contributed ideas! I foresee many hours of play enjoyed by this play kitchen, and hope it can be passed on to future generations!

Made this for my lovely friends Melissa and Lance and their adorable little boy Rylin.

Saw this clever side table on Pinterest. It's made out of 1 1x8x8. I was able to figure out how to build a jig for the table saw to suit the project and then it was easy peasy lemon squeezy from there.

Super easy weekend project! 

I Decided to paint a feature wall in my kitchen! I’m really into geometric shapes right now and the next few projects I have planned will reflect this. 

I used some skinny tape to mark my lines and then put yellow frog tape on each side of the skinny tape and then removed the thin tape in the middle that was marking my straight line, this way my lines were all the same thickness and it was a really easy way to make sure I liked my line placement. I tried to make sure i had no two lines parallel with each other so that my pattern looked random and abstract. To limit the gold paint from bleeding and make certain my lines would be as crisp as possible I did a first coat with navy (same as wall color) over the taped lines- this kinda seals up the edges of the tape with the wall. Taping my lines was the most tedious part of this project but once they were on, it was as easy as waiting for coats of paint to dry. And I love the finished product! Really adds a POP to our kitchen! 

Check out the project on my Instagram, I will be posting some process photos and videos soon. @halfwayhandy

8 foot long photo ledge inspired by $10 ledges project plan, http://ana-white.com/2010/10/ten-dollar-ledges.html

I used a 1x4, 1x3, and a 1x2 and added some crown molding to the bottom for a little something extra.

My friend saw the Gaby Kitchen Island that I posted on FB and asked me to make a wine display for him. I immediately went to Anna's site to look for a design. Added LED lights from IKEA.

Cabinet with adjustable shelf. Finished in an antique white effect. Gave it a coat of Grey stain first then painted with two coats of white sanding back after each coat. Top was stained Walnut and then painted grey and sanded back to show some of the walnut stain and the grain through. I left the inside natural color for contrast rather than having it all white .

This was a fun little project to make. The golf ball is trapped inside the 12 piece burr puzzle. As with all burr puzzles, there is a trick to solving it.

Build Instructions/Dimensions: https://www.instructables.com/id/Caged-Golf-Ball-Puzzle/

Video of Build: https://youtu.be/gcdd7ZAYNTo

Solution: https://youtu.be/IjHByz2_xMk

I made this for my daughter for Christmas last year. Well, actually Santa did, or at least that's what she tells people. I had one of the big companies cut the lumber for me, but a few boards were cut incorrectly. I live about 25 minutes from a local hardware store and needed to have them re-cut. Luckily for me, my father-in-law is handy and he brought out his circular saw and helped me even out my boards. Then, for Christmas I got a gift too - a table saw.

I've been eyeing the Land of Nod library cart for months!
...However, I wasn't sure about the price tag, so I started researching how to make it myself.
This is our first of many projects!

I loved the simplicity and shelving of the Parson Tower desk plans but I really wanted a standing work station. I made it taller (approx. 40 in tall) and I made the desktop longer and wider (approx. 72 x 24in) and I LOVE it! 

Farmhouse bed. Makes a pretty universal styled bed

Modified the bed so that is was not as tall as the original project plan. We also changed the molding on the top to a 2x4 with a angle cut and then a 1x4 on top. The bed can only be positioned one way in the room and we didn't want to cover the window with a real high head board. Thank you Ana! You rock!!

I've got a full how-to and FREE PLANS at
http://www.iliketomakestuff.com/two-person-picnic-table/

The whole thing was built for under $60 and could be done with only a circular saw and a drill, in an afternoon.

(optionally, a router and sander can smooth out corners)