Community Brag Posts

Parson Chair Slip Cover with Chevron Fabric (so easy!)

Slip Covers were easy peasy to make and really spruced up my kitchen table with some much needed color. Follow all the detailed steps on iamhardware.com.

Estimated Cost
$10
Estimated Time Investment
Afternoon Project (3-6 Hours)
Recommended Skill Level
Beginner

Comments

DIY Pixel Mario Wall Art

I love it when I can combine woodworking and geeky things. The classic Super Mario Bros was my introduction to video games, and thus 8-bit Mario will always have a special place in heart. <3

I have a tutorial on my blog on how to make the pixel Mario. I also made a video tutorial. WATCH IT HERE.

 

View in YouTube.

Estimated Cost
$10. I purchased two 2x4s and purchased CA glue. The rest of the supplies I had on hand.
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Watco Danish Oil - Medium Walnut
ECOS Paints Woodshield - Special Walnut
Homemade Red Dye
Recommended Skill Level
Beginner

Comments

Storage shelf

Submitted by Anonymous (not verified) on Mon, 10/04/2021 - 18:45

We made smaller versions of your 8 foot shelf. The plans were perfect. Thank you very much

Built from Plan(s)

Comments

Tall Narrow Modular Bookcase!

Submitted by ferbit on Thu, 03/10/2011 - 07:55

This is my very first woodworking project! My oldest daughter badly needed a bigger bookcase... I made this last year and it's already completely stuffed full of books now! Home Depot ripped the MDF for me, hubby helped me put it together and then I finished it. Since it is tall and narrow, the sides were bowing inward. I decided NOT to make ALL shelves adjustable, so I made two of them part of the bookcase. Squared things up nicely. The rest of the shelves are removable though.

Estimated Cost
$70
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Two coats of primer, three coats of semi-gloss Acrylic Latex paint (same paint used on the trim throughout our house). I did not put poly on this project.
Recommended Skill Level
Beginner

His & Hers Closet Laundry Basket Dressers

Submitted by Sarah F on Fri, 05/24/2013 - 08:53

After 3 years of absolutely no closet organization, my boyfriend and I decided it was time. This was our first build together and my boyfriend was amazed that it was so easy to actually build something from wood. We already had 6 baskets that lived all around the room so they needed a home and that's when we found Ana's Laundry Basket Dresser. Knowing that we wanted to hide our dirty laundry in the closet, we found that the plywood box design in the closet made for some very dark corners and little arm room so we needed to modify the plans some. Instead of the plywood we used 1"x4" furring strips to make an open framework for our baskets. It's plenty strong enough and allows light to reach the back corners with the added bonus of looking like custom closet organization.

Built from Plan(s)
Estimated Cost
$50 for the pair including wood and paint
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Sanded, primed with Kilz 2, sanded again and gave it 2 coats of Behr Semi-gloss in Silky White.
Recommended Skill Level
Beginner

Rustic X Console

Submitted by cudazi on Mon, 04/13/2015 - 11:11

This is a half-width version of the Rustic X Console table on Ana-White.com. The oxidized finish came out purple and needed some sanding. If I build another like it, I would highly suggest sanding the X pieces before assembly. It went together very well and was my first Kreg Jig experience. 

Built from Plan(s)
Estimated Time Investment
Weekend Project (10-20 Hours)
Recommended Skill Level
Beginner

Landry Hamper Dresser

Submitted by old_man on Sat, 08/12/2017 - 15:46

So the GF at the time was not happy I was still living out of landry hampers. I promised here I would do something about it. This is what I did. The top hamper is used for soiled clothes, once it's full you simply remove it and bring it to the landry room. The rest just store clean clothes. Simple and effective. 

 

The hinges and latches are just outdoor gate hardware found at any of the big home improvement stores. The wood is just construction lumber. 4X4 for the frame, 1X6 strapping for the panels, and I think there are some 2X4s and 2X2s for the rails. Overall it took me a weekend and then some. I had to build it in two pieces to get it out of the basement, it is really heavy. I used higher quality hampers that had the regidity needed to be able to slide partially out and not buckle. 

Hardest part was figuring out the dimensions. How many 1X6s would be used vs how wide the hampers are. 

It's still being used over a year later. 

Estimated Cost
~75 due to high lumber costs in my area + cost of hampers
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Minwax stain and water based poly.
Recommended Skill Level
Intermediate

Plant, shoe and bag stand

Submitted by Anonymous (not verified) on Tue, 10/05/2021 - 02:39

This is a stand I made for my sister who wanted something at the front door to put her shoes and shopping bags

Rustic Console Table

Submitted by Anneke on Thu, 03/10/2011 - 21:51

This is a piece I made out of scraps just for fun. I'm pretty happy with how it turned out and how functional it is!

I looked on the Tryde Console Table and Simple Console Table as a reference and just figured out the dimensions from what material I had. I also added a piece of wood in the center, and winged it with the shelf on the bottom.

Estimated Cost
$5
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
2 coats of Minwax Polyshades Bombay Mahogany Satin
Recommended Skill Level
Beginner

Lack Inspired Entertainment Center

Submitted by eralben on Mon, 04/20/2015 - 07:24

The IKEA Lack Inspired Bookcase plans became my inspiration for the entire entertainment center.  I made a few changes to the bookcase plans.  I increased the height of the bookcases to 84 inches and added adjustable shelves.  I also included some major extras including a console for the TV, a bridge to connect the bookcases, and doors inspired by www.shanty-2-chic.com.

Built from Plan(s)
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Red Mahogany
Recommended Skill Level
Intermediate

DIY Kitchen Island

Submitted by CustomPulp on Wed, 08/30/2017 - 12:16

Island dimensions Bar 36" deep x 50" wide, counter top height and base has 24 inch depth. I was lucky enough to have the walnut donated for the project which I cut into 1" stips and glued together butcher block style. Also put a 1 1/4" band of walnut around countertop for appearances and to help strengthen the top. The base was made with pine and painted turqoise. The double waste basket was another touch I added. Thanks for looking.

Estimated Cost
base with lumber, door hardware, double trashcan hardware, corbels, paint $250.00. Pricing the Walnut if not donated, would have added another $300.00 to the cost of the project.
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
tung oil on top. Lowes Satin finish Valspar for the base
Recommended Skill Level
Advanced

Comments

bench

Entryway bench, modified size to fit space and added cushion. ** Cost includes foam and fabric for cushion. Bench itself cost about $60.

Built from Plan(s)
Estimated Cost
$90.00
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
1. one coat paint with primer, Behr French Roast semi gloss
2. sanded 120 grit, then 220 grit
3. two coats paint with primer, Behr French Roast semi gloss
Recommended Skill Level
Intermediate

slightly modified x console table with added hutch

I have been dreaming about this piece of furniture for 3 yrs....I used Ana's plans for the rustic x console but took out the front middle support and made it a little deeper I also turned the 2x4 vertically and added an extra 2x4 behind it to add extra strength.....because I wanted to fit 3 baskets from Target underneath...the hutch i just winged!....Thank you so much Ana for giving me a place to start!...I am in love!......

Built from Plan(s)
Estimated Cost
$230
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Maison Banche in Wrought Iron and vinegar stain (2cups vinegar 1/2 cup hydrogen peroxide and 2 things of steel wool)
Recommended Skill Level
Intermediate

Antique workbench console bar

Submitted by aem4v2000 on Fri, 04/24/2015 - 18:14

This project was much easier than I originally anticipated. Even cutting the legs at angles and sanding them down to appear curved was easier than I expected.  I also used early american stain by Minwax. I used only one coat though and in hindsight might have done two to make it a bit darker. I used Minwax clear paste wax (two coats) to achieve a low sheen and protective layer. I was able to find a toilet paper holder similar to the one Ana used at one of my local big box stores. I wasn't able to find anything else I liked better. 

 

 

Built from Plan(s)
Estimated Cost
less than $100 including the stain and towel bar holder
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Minwax Early American stain (one coat) and Minwax clear paste wax (two coats)
Recommended Skill Level
Beginner

Triple Pedestal Table & Bench

Submitted by Lishpav on Wed, 09/06/2017 - 19:56

It's turned out way more beautiful then I had thought. It was all the mini details that took the longest but made the look worth it 

Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Gel gray stain for the top gel prairie wheat for the legs
Recommended Skill Level
Intermediate

Modified Ann White Table

Submitted by Anonymous (not verified) on Tue, 10/05/2021 - 17:07

This is a modified version of your Farmhouse Coffee Table.

Comments

My First Project

This was my first project I did close to a year ago. I was so excited about the site I decided to go big right away and do a table and benches for our first house we hadn't moved into yet. I had help and it was quite the learning experience. I think I would start with something smaller first but in the end we got a wonderful table in our dining area that has had plenty of use!

Built from Plan(s)
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Minwax ebony stain and satin poly.
Recommended Skill Level
Starter Project

Farmhouse Bed

This is my favorite build so far! I love the look of this bed! 

One thing I wish I had known was how long it was going to be. The bed is a good foot and a half longer than my mattress, which is a standard queen. I would recommend measuring and cutting your side rails according to your mattress - I think I am going to go back and shorten mine. 

Also - I used my bed rails, instead of the slats this called for. I also used bed rail hooks (I ordered them from Amazon for $20) so that I can take this bed apart. 

Built from Plan(s)
Estimated Time Investment
Day Project (6-9 Hours)
Recommended Skill Level
Intermediate

Comments