Community Brag Posts

I am building a TV console and hutch (will be posting soon) and I have left over of small cut of boards from this project. While waiting for my media center to dry, I built this pet feeder.

I have this messy eater dog (weimaraner) who slobbers all over my floor moulding. Worst thing...she bangs the wall with her aluminum bowl when she tries to lick every single bits of her food there is! So, with that story to tell, I designed and built her a pet feeder(inspired by the small pet feeder plan). And no more banging and messy wall!

This took me for-ever to build but mainly because I have an infant plus two other children. I think the actual time in hours was about 15 for the build and about the same for finish work. We modified the plans to fit my sons full size mattress. We also spent a lot on lumber because, initially, I thought I would stain but ended up painting.

Built this bed and stool for my grandaughter's first "big girl" bed.

Great bookcase. I used a 3" screw through the top center into the wall to add lateral stability. Now it is rock solid. The majority of time was spent sanding and finishing.

My sister wanted a step stool for her grand-daughter via her daughter-in-law. Like our mother and grand-mother before us, we stood by the sink with our hands in the wash water "helping" with the dishes. She asked it I could build a stool. After searching through several plans, I came across this vintage step stool and changed it up a little for the personal touch. I added the cartoon characters to fit with my great-nieces theme and she now has something that she can "brag" about as she grows.

I saw this plan on pinterest and really liked the way it looked. I bought the wood, but let it sit for a year because it wasn't a priority. Well, we were getting a new dog and he needed a little more room due to hip surgery. So, I expanded the crate dimension and got to work. I added 6 inches to the width, and 4 to the length but turns out I was about an inch shy all the way around to fit a plastic liner tray. Next one will be better. I used birch plywood on the side panels and the bottom panel, but used 4 inch wide board to create a slatted top rather than a solid top. I put hinges on the top with a window latch style lock, and put 2 slider style gate locks on the door. the color was from using medium walnut Danish oil, finished with 3 coats of gloss poly. During the project, I took time to teach my 9 yr old daughter how to use various tools, from the drill to the power miter saw. It was a great bonding time for us, and for a worthwhile reason- the new dog.

I loved the Holman Entertaining Shleves from Pottery Barn, however, I didn't like the price. Taking the $10 ledge plans and modifying them, I set out to make my own. I used a 1 x 10 (bottom), 1 x 6 (back) and a 1 x 3 (front). They are 23 7/8 inches long to get the 3 shelves out of 6 foot boards. To get the holes to hold the top of the bottle, I used a 1 and 1/4 inch forstner bit. Since I had gift cards left from Christmas I splurged on the wood and bought the select pine.

These desk sets were made from scrap wood and left over finishes, and are the inspiration for the desk bling accessory set plan, the cedar 1-board desk accessory set plan, and the 1-board cedar 2 drawer desktop storage cube plan. I had a ball planning and building these 4 sets over the summer, and gave them to the girls at work today as Christmas gifts. They were a big hit!

The cube sides and drawer fronts are made from scraps of wainscoat paneling.

The gray set is a distressed finish (not shown - the matching cube storage included pulls painted in oil rubbed bronze). The Espresso painted set received pulls spray-painted in silver. The Onyx set was stained with Minwax Express color, with pulls spray-painted in silver. The blue set received 2 coats of paint, and a Walnut glaze. Those pulls were done with a gray paint wash, with sea glass pebbles glued on the fronts.

The pulls are all made from pieces of S4S moulding, sanded and then painted. These also received a poly topcoat before attaching with super glue.

Total time for each set is about an afternoon each. Each set received multiple coats for the finishes, but was well worth the effort.

For some added "bling," I raided my stash of sticky-back felt scraps and applied to the bottoms of each piece, along with the drawer bottoms.

(Sorry my photos aren't the best, there is a black spot on my lens which shows up on some pictures.)

I had a lot of fun making this! I'd been wanting a vintage factory cart for over a year when I found this plan on Pinterest which led me here. I wanted to get a rustic industrial look so I made the table in the picture from the Ana White site that is stained and not the green one. After getting the base built, my husband and I decided we wanted it taller (since we have a dog who would love to sniff at whatever we put on it). And while I'm at it, why not add some storage? So I added more 2x4s and attached them to both the base and additional 1x6s. I put the 1x6s on the front and both sides, leaving the back open. I flipped the whole thing over, put the casters on and added plywood to the bottom of those 2x4s. then added two small boards give support to the plywood, which created a storage shelf. I then sanded and stained it and finished it off with two coats of semi-gloss poly. I did not counter-sink my screws or used wood filler as I was going for the rustic industrial look and I love the way it looks. It is very sturdy, too. I have moved it all around, slid it on its side trying to get some decent pictures and its just as sturdy as ever.

What a great little gift idea and made this in about 4 hours. HD had 2x2 poplar turning blocks that were perfectly straight and pretty smooth to start with. Required minimal sanding. Each board was $1.98 but was 32 inches long. So you have to buy 15. Start with the larger cuts first. The end of each board will produce one or two of the smaller cuts. Used the food coloring and also coconut oil on the blocks.
Great project, had fun doing it.

I love the toy box plans!! I've done some woodworking previously, but this was my first larger project. The first one was so simple and easy to make that I decided to make more!

Tiffanni

When I saw this we had to build it. Hope you like!

This was an easy plan to follow! We built these for around our fire pit. The finishes is what took the longest. The tops are stained American Walnut.

I looked at all the sofas that people built and took bits out of a lot of them to decide what I needed to fit my needs. I am in a tiny house and I wanted the sofa to be super versatile as well as being good for storage. I decided to build it the size of a double bed, but to divide this into three sections so that it can be used as a sectional, a seating area for meals and a bed for overnight guests. It was a lot easier than I thought it would be.

Thank you for this, I would not have known where to begin.

I decided on brightly printed outdoor fabric because the interior of my tiny house is all wood and I though the bright colours would be a nice addition. The outdoor fabric was chosen so that it would resist water and stains as well as pet hair.

I mashed together several twin bed plans - farmhouse bed, simple twin bed and Hailey Storage bed to create this farmhouse style daybed. It's a very sturdy and heavy piece of furniture.

Made a few beds for my niece and her friends.