Lawn Chairs
Built these for my daughters new home
Built these for my daughters new home
Using old barn wood, too short for anything else. Love that four regular Mason jars can fit in it, and it is ideal for taking silverware outside for the BBQ's.
Cost was zero, all wood was from the scrap pile. Put together with a brad nailer, the is no finish on the wood. Actually build time was less then a hour. "Including clean up"
this is a coffee table that i had build just by looking at a picture and taking measurements of my previous coffee table that i had, I'm very glad to show the table off!
I made a few modifications.
I used shiplap instead of tongue and groove, raised the footboard by adding an extra 2 x 6 & used jacobean stain.
Thanks Ana for putting the plans and video on your site.
We had an empty area at the bottom of our stairs that was just calling for a hall tree. I love watching and learning from Anna's videos. I really liked 2 of her plans: the Farmhouse Hall Tree and the Mudroom Bench with Easy Drawers. I decided to combine them to make my own unique hall tree. Our teenage daughter used the "window panes" in the back to paint a Japanese Maple tree. I think it turned out beautifully. This is the first of Anna's plans that I've used, but I plan to use many more! Thank you, Anna for your amazing videos and desire to share your knowledge. We appreciate it so much!
Sat, 01/01/2022 - 12:13
That is sure to be cherished for many years, amazing art and amazing build! Thank you so much for sharing!
This is a slightly modified version of the Providence Bench. I used 1x wood rather than 2x wood, so the legs are slightly longer to make the bench come out to the same height. Made this to match a planked-top table. More photos on my blog: http://redhenhome.blogspot.com/2013/07/the-other-solomon-table-bench.ht…
Thu, 09/12/2013 - 05:46
I like the planked top! Great job on the finish - it's rustic without being overdone. It's one of the things i love about pottery barn furniture.
What is the hand-rubbed polyurethane? Is that just the wipe-on stuff I keep seeing at the store? Was it easy to use?
What a great project! This is my first Ana White project and definitely won't be my last!
I modified the garage plans to fit our basement. We have two beams the shelves needed to fit between, so I made the length 10' and bought 2x4s at 10'. Otherwise, I didn't do any modifications.
The wood was cut at the store for the lengths needed, making it super easy to come home and assemble! We secured the shelves to the basement supports and along the back wall. It's pretty secure and stable.
Overall this probably took a few hours (we took a break while constructing it). Next time I would make the shelves a bit deeper. 17" was fine, but a few more inches would have made the bins fit a bit better.
I am looking forward to making more!
Had a small bench that the previous owners of our house left. It was all made from 1x. Wanted something a little beefier to match the bed I built. So came up with this bench. Made from all pine.
I loved making this Ana White's Narrow Cottage End Table plan after seeing it here on a search. I made it for my mother's 83rd birthday. She asked for oak and a light stain (Rust Oleum's Summer Oak Stain). Used three coats of wipe on Poly and one coat of Johnson's paste wax on the top. I bought the blue knob at Cost Plus World Market. The project took me two days. Will difinitely make another one but in pine this time.
I needed an office and also a guest room so i built a she shed and all the furniture.
Thu, 01/25/2018 - 06:27
I love your murphy bed idea and would love to have plans for it. I too am looking for a guest bedroom and craft area and I know this would work in my space.
Mon, 02/05/2018 - 16:20
I didnt really have a plan when I was building my Murphy bed, I can do a sketchup plan for you if you would like. I used boat chair swivels instead of hinges and there is a YouTube video on how to do this.
Chris
Thu, 06/24/2021 - 23:11
Hi Chris! I would love to have a copy of the sketch up of this. I have a small she shed/guest cottage I would live to duplicate this in. Thanks in advance.
Mon, 11/08/2021 - 14:18
Hi Chris!
I know I'm coming late to this party but I just found your shed and I adore it. You did an amazing job and I cannot express how impressed I am! I would also like a sketchup plan of both the murphy bed and the adjoining side cabinets. Great job!
Thu, 06/06/2019 - 10:59
I absolutely love everything about this she shed!! I would be interested in a sketch up of the murphy bed as well as the cabinets next to it. I would at least like to know what the dimensions of it all is. You did an amazing job! It's so beautiful!
Tue, 06/25/2019 - 15:14
Me too!! I built a horizontal Murphy bed so I have that part done but I would like to see the plans for the cabinets on either side with the pull out desk!
so very cute!
Thu, 05/14/2020 - 05:53
I would love the plans for all of this please! This is exactly what I have been looking for! Thank you!
Sun, 09/20/2020 - 00:13
Hi Chris
Can you advise how I can receive a copy of the sketchup? I love the entire setup from the bed to the additional shelving.
This was my first project, so it took me a while to make since I had to figure out what I was doing. But, it was so much fun and I'm excited to make more!
I designed and built these beds with the help of my husband and daughter. We spent about $350 on the materials and about 4 days in the Texas heat to build it. My kiddos absolutely love them, especially my 7yr. old. His is the loft bed with a ladder system and a bookshelf, and area to play underneath. The bunk bed is for my 18yr. old and my 14yr. old, so it had to be extra sturdy. We built everything out of 2x6s except the bookshelf. It was built from 1x12s and plywood.
We made this storage bed for our teenage daughter. She helped! She picked out the stain, comforter, and went through different plans with me to make it her own. She learned how to use a miter saw, sander, etc. and it was a great bonding experience. It's a few different plans, and we had to make modifications, but it is immensely better quality than store bought furniture we purchased a few years ago (it's falling apart!) and it has sentimental value. We are proud of the furniture, but even more proud of our daughter. :-)
Made our own twist on the leaning ladder shelf. Turn the side boards of the selves around, causing the shelves to looks like thick boards.
This was a super easy and quick project. I actually lengthened it to 36 inches. I can't decide whether I need two ledges or not, but it won't take long if I need another one! My only suggestion- VERY straight boards are a must!
I bought two sets of Restoration Hardware cushions on clearance and they worked out great. I had to adjust the measurements a little bit but that went pretty quickly. I came up with a plan for the tables to match the couches.
The tables are both 30x30. This way I can use them as 2 tables, one large table, ottomans or seating.
I LOVE the cushions. They are 6.5 inches thick and were dry 3 hrs after a rainstorm. There was no way I could have sewn something cheaper.
Thanks for the plans Ana!
One of the most rewarding, yet frustrating projects done to date.
A project completed over the course of several weeks challenging the limited tool set available.
In the end, the cost of new tools and frustration of assembly was all worth it!
Girls table was too small, especially when they have friends over. We have a little nook that this will slide right into in the living/dining room. The bottom has drawers, they just were not completed when i took the pictures.
My first indoor furniture project - the Rustic X coffee table. I added a lift top to store remotes etc and use as a laptop table. Fairly easy build I only had trouble aligning the "x's". I used of the shelf dimensional lumber but I might try this one again using different wood and a lighter finish.
Thu, 02/03/2022 - 15:16
Thank you for sharing, this is gorgeous and functional!
I built a smaller version..THank you so much Ana for the plan. This one is only 2 ft tall and 22.5 inches wide..Perfect size for my 2 year old.
I added a hook to hang my daughter's doodle and on the other side, I added an aluminum tin(wrapped in a scrapbook paper sealed with mod podge) so she can put her magnetic letters/numbers on there. Added this little crayon holder as well. :-)
Comments
Ana White Admin
Wed, 12/29/2021 - 10:41
Beautiful chairs!
Those look great, your daughter is sure to love them! Thanks for sharing.