Community Brag Posts

Rustic bench

Submitted by Anonymous (not verified) on Sat, 01/11/2020 - 11:38

Love this little bench! My bench is a little bigger than Ana's, and the seat is not as deep, but the plans were super easy to follow. It's just what I needed to finish out my living room!

Built from Plan(s)
Estimated Cost
$3
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
Dark walnut stain
Recommended Skill Level
Beginner

Shoe Dresser - First Project!

Submitted by mashhawkes on Sun, 04/15/2012 - 13:33

I know that Ana says not to do this as your first project but I couldn't help myself! We needed shoe storage BAD!! This project was not bad but did take my husband and I about 3 weeks to build. It had nothing to do with the difficulty just scheduling conflicts. We needed somewhere to house all of my husbands shoes and something that would not take up much space because the only spot we had to put it in our bedroom was between the bathroom door and my husbands closet door. We used Ana's plan for the shoe dresser but did had to modify it to fit the 44" spot we had to work with. The 1x8's that we used were only 7 1/4 instead of 7 1/2 but my husbands size 12 shoes fit without a problem! I can't wait to start our next project! Thanks Ana!

Built from Plan(s)
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
English Chestnut stain with 3 coats of antique white. Distressed by hand using 220 grit sandpaper and then covered with 3 coats of satin polyurethane.
Recommended Skill Level
Intermediate

See-saw

Submitted by bhammond on Tue, 01/28/2014 - 21:03

This easy project made me the best Aunt ever! I made it for my nieces and nephews for Christmas. It was such a huge hit that one of them threw up all over it from laughing so hard. :)

The garage was freezing cold but they stayed there all evening once they discovered their gift.

Built from Plan(s)
Estimated Cost
35 including screws
Estimated Time Investment
Afternoon Project (3-6 Hours)
Recommended Skill Level
Starter Project

Lego Table

Submitted by Anonymous (not verified) on Tue, 04/26/2016 - 06:52

Very Easy project, the plans are straight forward. The kids love having a table to play lego's and we love being able to hide everything away. Very Nice Table. When the girls get older and the Plywood cover shows signs of wear from much use, I'll probably replace the cover with one made from pine 1x6's biscuit-joined to give a nice textured look, but still with the storage for games and stuff.

Estimated Cost
$225 CAD
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
CIL Crisp Linen Paint & Minwax Red Mahogany Stain with 3 coats of Minwax Polyurethane Topcoat.
Recommended Skill Level
Beginner

Long Modern TV Console with Pallet Wood

Submitted by Anonymous (not verified) on Fri, 01/17/2020 - 14:18

This project was a Christmas present for my girlfriend. I modified these plans a little bit to put the open shelf in the middle and used the pallet wood for this instead of it being white. The pallet wood was such a pain to cut up in to usable strips but after cutting them down, gluing them up, and sanding them down (for ages) I couldn't be more pleased with how they turned out. I used Watco Danish in medium walnut for the finish and I think it brought out the imperfections in the wood beautifully. I just used some pre-made legs from Amazon instead of the base out of laziness.

Estimated Cost
$125
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Watco Danish Oil in medium walnut
Recommended Skill Level
Intermediate

Covered Pergola Walk Way

Submitted by Anonymous (not verified) on Fri, 09/15/2023 - 08:38

Built a pergola with a roof attached to a pool house.

Ed Nixon & Jim Reitenbach

Modified to fit an Earthbox and mounted to a bench

Submitted by BJ D on Wed, 04/18/2012 - 06:16

I took the design of the planter and stretched it to accomodate an "Earthbox" (which is 29 x 13.5x 11 inches) to see if I could boost the results of my little garden. Both planters were made the same size so that if I'd like, next season ,I can use two Earthboxes.

The bench was built to keep out bunnies, our Husky, give us a place to put down the bowl when picking from the garden and lastly to give Georgia a place to climb up and get a better view or help. It is made using some treated 2x6's for legs aand support and untreated 2x4's for the actual benchtop.

I'll add a protective finish (and missing trim on both ends) to the bench part later this week when I have some toddler free time at home :)

Built from Plan(s)
Estimated Time Investment
Afternoon Project (3-6 Hours)
Recommended Skill Level
Beginner

Comments

Fancy Desk - First Build

Submitted by mtairymd on Sat, 02/01/2014 - 04:02

This was the first project for me and my 15 year old son. He wanted a large, sturdy desk for his room. We loved the plans and we think it turned out pretty well.

Estimated Cost
50
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Minwax black poly+stain
Recommended Skill Level
Beginner

Comments

Sideboard - 1st Build!

This was my first build from Ana White and my first piece of furniture.  It is doable for a determined, handy beginner/ intermediate.  I took my time and worked on it when I could, thanks to my wife for letting me take over the garage for several weekends and her great painting skills!

Built from Plan(s)
Estimated Cost
$400
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
General Finishes milk paint: Buttercup (yellow)
Sherwin Williams: Blue Bell

General Finishes: Poly Finish - satin

We primed it white
Two coats yellow
Two coats poly
Light sanding between each application with superfine sand paper sponges.
Recommended Skill Level
Intermediate

Modern Farm Bench

This was my first Ana White build, and I’m hooked. Super simple for a beginner to make. 

Built from Plan(s)
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
Minwax walnut stain
Recommended Skill Level
Starter Project

Scrap Wood Dog Bed

Submitted by Anonymous (not verified) on Mon, 09/18/2023 - 15:22

Scrap wood build for a dog bed. I built a new couch to replace the chair she destroyed and used the old chair cushion in her new bed. Has kept her off the furniture and on her own bed ever since.

Grace LeBlanc

Rosie's Baby Doll Bed

Submitted by nveelover on Sat, 04/21/2012 - 10:13

Made this based on the Oliva's Doll Crib plans with changes to the shape of the top of the ends (to better match my daughter's crib), taller end pieces (about 2 inches), and a shelf under the drawer. To keep the drawer from falling out, I built the crib as usual, then turned the crib upside down, and screwed two rubber stoppers to the front of the underside of the crib bottom. I then put the drawer in place, placed the bottom shelf, and then screwd it in through the bottom (which is on top right now because the whole thing is upside down). I also put in some spacers so that the drawer doesn't get stuck, squished between the bottom of the crib and the shelf.

Built from Plan(s)
Estimated Time Investment
Day Project (6-9 Hours)
Recommended Skill Level
Beginner

Comments

kad050209 (not verified)

Mon, 09/10/2012 - 15:49

Can you tell me the measurements of wood you used? Piece by piece?

nveelover

Thu, 11/15/2012 - 16:05

I really did just follow the plan that Anna made. The ends, the tallest solid pieces of wood that I added length to, are about 21 inches long. Ana had them at 18 or 19 inches long. Everything else was the same.

Bedside Table

Submitted by AndyH on Tue, 02/04/2014 - 10:34

This is my third build based on the Kentwood Nightstand plan. Added a shelf this time to use as a charging station at night. Customized the height as well so matches the height of the bed.

Estimated Cost
$100
Finish Used
Minwax English Chestnut (3 coats) and Minwax Satin Poly (3 coats)..
Recommended Skill Level
Beginner

Comments

My version, cheater style

Submitted by januaryMH on Mon, 05/02/2016 - 17:42

I believe I found the orignal quick version on the Finding Aloha site with a link back to Ana's original Farmhouse Bed. I made the blanket and bedding from some cheap FQ's. It was a hit for my neice's 7th birthday.

Estimated Cost
I had about $12 in all - including the fabric and wood.
Estimated Time Investment
Day Project (6-9 Hours)
Recommended Skill Level
Beginner

Baby Boy Nursery Dresser

Submitted by Anonymous (not verified) on Wed, 01/29/2020 - 08:41

My wife had me build this dresser for our baby boy. She took features from a couple different Ana White dressers and combined it into one. We also added to the height of the drawers, adjusting the overall height of the dresser to serve as a baby changing station.

Estimated Cost
$250
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Valspar satin finish and a poly clear coat
Recommended Skill Level
Advanced

Easy Table Build

Submitted by Anonymous (not verified) on Thu, 09/21/2023 - 12:26

A very simple but very fun build.

Casey C.

Farmhouse Table

Since I am in the middle of a divorce, my ex- took my dining room furniture. I decided instead of buying something new, or getting a hand me down, I would build a new table. The wood top was made of 3 wood planks from my sister in laws hardwood flooring leftovers. It was sooo fun to make this. The stain was a mix of Minwax Providence and Ebony 3 to 1 mix appx. I did not add the bottom wood piece, as I did not think it needed it, it is plenty strong without it. I am working on the bench and chairs now. This has been by far my most fulfilling project ever. Enjoy!

Estimated Cost
$100 for stain, trim, poly etc. I had a lot of the wood, not the breadboards
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
2 coat mix of Minwax Providence and Ebony (3 parts to one part)
4 coats Polysealant

Recommended Skill Level
Beginner

Comments

brookifer86

Tue, 04/24/2012 - 09:55

I think you came up with a great solution to your dining room problem. As a victim of the "ex furniture snatch" myself, I also decided to build my own instead of buying. It was quite the confidence boost! Love the table with the wider boards. I also didn't use a stretcher for my Farmhouse Table, and it's held up perfectly for over a year now.

KellyJo1180

Thu, 09/27/2012 - 08:38

I am looking to do the same design with the larger boards in the middle. What size are the boards running vertically on the ends? 1 x 6?

justjack5454

Fri, 12/12/2014 - 13:59

I love the table you built thanksgiving day my table went
awol, so I need to get going on your design. P. S. I'm lipstick, sawdust, n wheelchair.

Farmhouse Media Console

A Farmhouse Media Console built from ana white's plans. This media console was built out of maple plywood and poplar for the face frame, doors, and top. The design at the bottom was a bit of a trick. I used a bucket for the half circle and a very thin piece of wood for the "wavy" design. The center door is known as a barrister door. I would be happy to answer any questions. Feel free to visit my facebook page www.facebook.com/timberandsoul

Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
creme brulee paint by behr and early american stain by minwax with 3 coats of water based varathane
Recommended Skill Level
Advanced

Comments

Wanted to show off our version of your American Girls bunk bed!

Submitted by jdinesen on Mon, 02/03/2020 - 05:53

We had the mattresses and bed covers made !

We did increase the height to 20" which seemed to add a little extra space between the bunks. My daughter were able to help, she is 10. This was a nice and quick build !

Thanks Ana,

Jesper

Estimated Cost
$25.00 - I did not include the cost of the additional tools I had to purchase ;)
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
White Paint
Recommended Skill Level
Starter Project
Back