Community Brag Posts

Modified roof orientation and extended to 16

This is my secend ever furniture build. I build it inspired by this storage bench from bed bath and beyond. http://www.bedbathandbeyond.com/product.asp?SKU=132657

I am pretty happy with it!

I loved the idea of the shoe dresser and decided to fancy it up a bit. I changed the dimensions a little to suit the space in my home where I wanted it to go. I decided to use the dowel pins for the doors because I didn't want to be able to see the hinges - which I found to be the hardest part - you need to make sure you get them as low in the corner as you can otherwise your doors won't open. I also found that I didn't cut enough off the top of the dividers which prevented the doors from opening - they needed to be more slanted than round at the top - I ended up having to use a planer to take the excess off. Very happy with the way it turned out - just have to train the kids to put their shoes away now instead of all over the floor :)

I wanted a smaller table than the plans called for, so I built this one at 51 inches. The side design is slatted rather than built with an X. I love the more modern look with this mission-style modification. This was my first build and I'm pretty happy with it and how easy these plans were to follow.

We followed the plans, but did run into a couple snags. Because we were making two tables, we thought it might be easier to do all the cuts first, and then assemble both together. We agreed it was easiest in the end (so we weren't going back and forth to the saw), but the cut list called for one extra trim piece that the plans never used... lucky for us, we realized this before doing the cuts so just skipped it. The cut list left out one piece that the plans asked for at the end (for the life of me, I can't remember what it was), but we had quite a bit of extra lumber thanks to carefully thought out cuts so it wasn't a big deal.

We found that the plans really forced us to think out our approach along the way. We are true beginners, and we even ended up having to think about where we were sinking the screws and making sure to sand the pieces prior to assembling.

As far as our materials went, we purchased most of it at Home Depot. For the tops, we decided to use some scrap MDF that we had leftover from another project. Otherwise, we just used the cheapest lumber we could find, and pine for the 1x6 and 1x12's. Our Home Depot bill was $104, but we have a few pieces of lumber and pine that we didn't use, so plan to take them back. We already had the paint, and we bought the hardware at Lee Valley in Vancouver (BC), which was $24. We figure that the end price for each table is about $60.

For more details, check out my blog post on the project: http://www.andreakrisourchaos.blogspot.ca/2012/03/pinterest-challenge-b…

I saw this on pintrest and took the big Kids picnic table and modified it to include a removable top and sandbox.

My wife Tracy and I wanted a dresser like this for one of the bedrooms in the new house. Well Tracy went to work looking for one on Craigslist and E Bay ( She is the best at hunting down a bargain). After only one day she found an add for a solid wood dresser for sale in our area. When I came home from work she let me know there was a project in the back of her vehicle for me.
I was very impressed with what she had found. This was a serious solid wood dresser. With me having a couple of days off prior to our trip to Cabo (and Tracy needing me out of her hair while she finished all the details needed for the trip) I started on this right away.
The dresser had never been finished, it was just raw wood. This was a plus for me because no stripping was needed. Just a little light sanding is all it required for prep work.
I discovered that the knobs did not match. After a quick trip to Menards the dresser was complete.
Total cost of our dresser $65.00
See more pictures at buildandsave-mike.blogspot.com

My husband surprised me with a big pile of wood in the garage on Christmas morning. 3 weeks later, this beautiful table is in my kitchen. The pictures do not do it justice - it turned out amazing. We have plans to make the matching bench when it warms a bit - our garage is freezing!

It took at least 20 hours to cut the wood, sand and assemble. It took another 10+ plus hours to stain and put 3 coats of the polyurethane.

The great people at Orange cut our wood for us, and we took it home and notched it out using a jigsaw. Once we got the hang of it, it was really easy.

We had a hard time finding 2 3/4 screws, so we used 2 1/2. It worked great. We used Elmer's Carpenter's Wood Filler in natural to fill the screw holes. It turned out so nice and looks great with the stain on top.

Neither my husband or I have very much experience building anything, so we took our time - measuring about 60 times and cutting once. However, it paid off. The table looks so great and I cannot wait to make the matching bench!

Dog Console from Modern Farmhouse Console.

It was after getting to know your website and seeing all your nice craftsgirlship we decided to make our own garden furniture.

We are wery satisfied with the results, thanks a lot for the inspiration!

PS) Time investment = per item.

Nesting tables with golden oak stain and poly on top.  The last pic of the small table made with 1x2's for 2 legs and 2x2's for the other 2.  Distressed by my daughter Kimberly.  

Fun project that my son and our next soon to be baby will enjoy for a long time. Plans were very easy to fallow and easy to build.

I'd been wanting to add a piece of furniture at the end of my son's bed for awhile, but I had a difficult time deciding on what exactly to do. Not only did I want it to be something he could sit on, but also I wanted to add some extra storage. We had thought of a trunk but the idea of little fingers getting pinched made that idea a little scary. I turned to Ana-white's website for help. I didn't find exactly what I wanted, but I did get some inspiration from the new Kentwood Bookshelf. It's constructed the same way but with some sizing adjustments.

I made this for a grand-daughter for Christmas and followed the McKenna Doll plan from the plan catalog . My wife made the pad and quilt from a link on the doll plan site. Made from scraps left over using my Kreg jig and spray painted with a gloss purple, her favorite color. I also made a bulletin board near the desk and added cup hooks for the hangars on the ladder side.

Fun project. It ended up being more time consuming than I had originally planned.

Made my wife a Ana White DIY porch bench for our 10 year wedding anniversary. Had a custom plaque made: Sarah’s Bench.

Looks beauty on our front porch.

Jesse Micak, Ontario, Canada