Community Brag Posts

One of my first "big builds.: Learned so much making this! I love it!

I took Patrick's design and expanded it. The dresser is deeper and has one more drawer than the original. The finish is only slightly distressed because that's how my 'client' wanted it. The drawer slides were the toughest part. The carcass MUST be square or at least very close. I built the whole thing, then tore the carcass apart and rebuilt it because my first attempt was not square enough. Obviously the drawers won't slide smoothly if it isn't square.

Edit: I get a lot of requests for the plans and/or cut list for my modifications. I do not feel comfortable re-posting the plans on my website and can not do it here either (only pictures can be uploaded). Please feel free to e-mail me (bbomerATgrvland.com) or request the plans in the comment section of my blog (linked below) and I will send you a .pdf that shows my modifications at each step.

Edit 2015-01-26:  I do not believe that I am getting notifications for all the comments here, so please use one of the methods above.

Edit 2015-01-28: I have posted my alterations here: http://grvland.com/wordpress/2015/01/28/dresser-plan/.  Please comment there with any questions, because I can not guarantee that I will get notified if you comment here.

This is a project I completed last summer. I made some revisions to the original plan. First off, I wanted a corner sofa, so I had to figure out how the corner would work. This was my first ever wood working project and I'm not an architect or engineer, so it was quite challenging. I made a mini model out of foam core to give me a visual of how it would all work together. That was a tremendous help and I recommend doing this to anyone just starting out.

I did not use the part of the plan that included the foot pedestal. Instead, I built the sofa flat on the ground and in the end added store bought feet mainly because I liked the looks of them.

The sofa was built exclusively with the Kreg Jig, except for attaching the horizontal back pieces. I could have use the jig for that part as well, but liked the rustic look that screwing them in to the back braces provided.

I didn't want a padded back because the sofa sits outside on a covered, screened in patio year round. I wanted the ability to take off and wash all the cushions, or to use the bench without the back cushions sometimes.

The 2 sections of the couch were built as independent units and are movable, so one can sit across from each other. Both sections have ample storage.

My husband and I took this on as our first project.. very happy with the results!! Our american bulldog gets kennel anxiety so we thought we would try this and he loved it right off the back! It is nice and lg he is 90lbs and our little one has made his way in with him to and he is 25lbs they both fit comfortably!!!

I'm a complete amateur and the instructions made it so easy!

Lori

This project was super easy and free! I just used some scrap wood I had, along with stains and finishes already on-hand and built this Pottery Barn Kids knockoff shelf while the baby napped! For the complete play-by-play, click my blog link!

I found a bed on line that I loved but I didn't want to pay the sticker price. I found the plans here that were very similar and we built it from your plans with a few modifications. One being the side boards are 12' wide so that it will completely hide the box spring. I love the finished look. Thanks Ana!

My nephew new wood shop getting it set up power and lights.

We saw this bed and decided to make it after getting tired of the sad state of our bedroom furniture. My husband built this as a weekend project. We also built the Farmhouse Nightstand, and plan to build the Wide Cabin Dresser stained to match. The bed is very sturdy, even with three kids horsing around.

We've moved into a new house and I have lots of furniture I want to build. The side table was a pretty easy build, I did it in a couple hours in the afternoon. This is my first project with a drawer. The tricky part to it was putting the bottom in. I think i need to get a router so I can cut some grooves to slide it in. Trying to put brads into a 1/4 inch thick piece of plywood was really tricky. I didn't really use a plan, I just put it together based on the wood that I had available. I built it pretty much from scraps from other projects I've done.

I just Get up and saturday morning and I felt inspired and start to build  that window balance for my bedroom and I call it Templary Style

DIY Octagon Picnic Table

To finish my laundry room off I decided to build laundry cabinets - this laundry basket dresser is perfect! I used 8in. fold down shelf brackets (like the ones in Lady Goats Miter Saw cart). I also cut corners on the back since I was out of plywood after building my laundry cabinets. I used 3 1 X3s to support the back. I used a pine project board for the top which is only 24in deep so I did adjust the plan for that and the baskets still fit!

I followed the basic plans for the kent wood nightstand but made a few changes. I made paneling out of 3/4" plywood for the sides and door/drawer and routed a 1/2" by 1/2" channel into the face frames to slide the panels in. I added a drawer and made the door smaller. Instead of using the strips of wood for the top I framed it with 1x3's and inset a piece of Wedi tile underlayment. Wedi is a closed cell foam that is coated with a cement membrane. It is pretty durable and completely waterproof. I then used white thinset mortar and set 3x6 tumbled travertine in a herring bone pattern using a 3/16" v notch trowel. Grouted the top of the tile and caulked with color matching latex caulk where the tile meets the wood frame.

Built using the Farmhouse Bed - Queen plan, making adjustments for the Full size matress.  The finish is a blue milkpaint over a white base and distressed with a sanding pad.