Community Brag Posts

Built in Secretary hutch

Wanted a builtin hutch change the plans a little for depth and height. I used tempered glass instead of lexan for the last ability as lexan discolor and looks a little cheap. Mostly red oak plywood, but choose hard wood for shelves so they wouldn't sag and small desk drawers and doors because it was easier to buy it cut and cost effective. Wish I would have done the drawer faces hardwood also. I used maple on the bottom and decided I wanted more grainy look so finished the desk and top with redoak. Matches bottom trim which was red oak. Special ordered old style secretary desk hinges. I had them played $60 for both. I liked the look and they are stable. Time consuming building but impressive when done. Don't know why photos alway turn up sideways, tried flipping them and saving them same result...

Estimated Cost
$500
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Pecan maple stain, semi gloss poly. Stain poly, sand poly.
Recommended Skill Level
Intermediate

Saw horse patio table

Great table! Loved the build. 

Built from Plan(s)

Comments

Coat Rack

Submitted by mweir on Tue, 04/24/2012 - 19:17

We needed a coat rack in the mud room to go along with the X Bench that I built earlier. This was made from a drop of wood left over from the bench. I had the hooks left over from a project I made a couple of years ago. My wife says our mud room is now complete. I used the plans Entryway Bench and Storage Shelf I just didn't use the shelf part

Estimated Cost
$5.00
Estimated Time Investment
An Hour or Two (0-2 Hours)
Recommended Skill Level
Starter Project

Comments

Planter Box from Pallets

Submitted by mtairymd on Sat, 02/08/2014 - 05:10
Estimated Cost
$5 Stain & Nails - free pallet wood
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Red Oak
Recommended Skill Level
Beginner

Coffe table

Submitted by rnkimg on Tue, 02/04/2020 - 12:23

Plans from the Tryde table plans. Added bottom shelf. Next up, Tryde end tables, one is done, other trying to plan it out to include a drawer. I added carriage bolts for looks, and black metal corners. So much fun! 

Built from Plan(s)
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
Minwax provincial, sealed with Minwax clear gloss polyurethane.

Comments

rnkimg

Tue, 02/04/2020 - 12:36

Thanks Ana!  You really were my inspiration to try and build furniture. With every build I’m getting more comfortable. I talk about you all the time when people ask where I learned... Ana White! 

Thanks again. 
btw. I really need rocking chair plans!

Karyl75

Tue, 04/14/2020 - 20:32

What kind of mods could you add in order to open the table top for a bin. Nothing deep, but a great place to keep a firearm, hide remotes etc.

DIY Wood Bed

Submitted by Anonymous (not verified) on Fri, 09/29/2023 - 09:13

Spruced up guest room by replacing full size bed with Ana's design for a queen size headboard and frame. Love the result! Thanks Anna

Built from Plan(s)

Comments

Housewarming gift, Dining Table

Submitted by sgilly on Sat, 02/15/2014 - 08:15

So my son and daughter-in-law have a new home, and lots of empty space. I told them to find a table they liked and I'd try to make it for them. They liked the PB benchwright table (http://www.potterybarn.com/products/benchwright-dining-table/http://www…) with the iron support pieces. I had to get creative for those using electrical conduit and some plumbing pieces that I spray painted black. I finished it exactly like Jen of House of Wood (http://jenwoodhouse.com/blog/2013/06/07/diy-dining-table/) and it turned out beautifully!
It was a fun project and they love it.

Estimated Cost
$300 for table and bench
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Wood conditioner, Minwax special walnut and weathered oak, whitewash (old white paint diluted), satin poly topcoat. The 9 step finish was definitely time consuming, but so worth it!
Recommended Skill Level
Intermediate

Entertainment center

Submitted by Anonymous (not verified) on Sun, 02/16/2020 - 21:53

Hand made entertainment center

Estimated Cost
400
Estimated Time Investment
Weekend Project (10-20 Hours)
Recommended Skill Level
Intermediate

Comments

Farm Style Headboard with Lights

Submitted by Anonymous (not verified) on Fri, 10/06/2023 - 08:51

My daughter wanted a Farmhouse/Industrial look for a headboard, so I found a nice selection of hardwood pallets that had heat treated wood and put together this headboard & attached and wired a light set.

P.Schimmelpenningh

Built from Plan(s)

Modified Farmhouse Bench

This was a very modified version of this plan. I mostly just dismantled two stools and built the top. The top is one solid plank of wood and two layers of 1x2's to create the frame. It goes perfectly with my Farmhouse table. I love the character of the wood top, its so unique. Enjoy!

Estimated Cost
$10 trim only. I used mostly scraps and furniture I already had
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Minwax Providence and Minwax Ebony mix 3 to 1.
Recommended Skill Level
Beginner

Shaker style cabinet doors and drawers!

Submitted by ksmith311 on Sun, 02/16/2014 - 16:49

After some inspiration from Ana, my husband and I tackled refacing and rehabbing our original cabinets circa 1939. The drawers and shelves were in rough shape so we built our own using the kreg jig. We're extremely happy with how everything turned out. When the weather gets better we will be building new cabinets on the opposite side of the kitchen where unfortunately we don't have ANY storage.

Thanks for looking!

Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Farrow and Ball "Lime White" uppers and Benjamin Moore "Kendall Charcoal" lowers
Recommended Skill Level
Intermediate

Changing Table with slideout shelf

With a little one on the way, we just couldn't find a changing table that fit our space and wasn't too expensive. So, thanks to Ana's plans, I was able to put together a smaller changing table with a slide out shelf. In the future, I'd do a better job of measuring out the height of the middle sliding shelf...anyone over 5'5" will have to bend way over to slide it in/out. I switching the 1x4s from the top to the middle shelf and made sure to measure my changing pad before starting (after reading the comments on Ana's original design). My local lumber store cut my 3/4" ply to size for free, so if you can go in with dimensions already planned out, it'll save tons of time and headache driving with 4'x6' ply floppin' around.

Built from Plan(s)
Estimated Cost
$50
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Interior primer and semi-gloss interior bright white paint.
Recommended Skill Level
Beginner

4x4 Truss Beam Table with upholstered bench

Submitted by hubn8147 on Tue, 02/18/2014 - 14:35

I shortened the length of the table but kept the width. I have to re-figure the angles of the cross beams underneath. I also added decorative hardware to the raw post edges on the sides, on the edge of the breadboards, and underneath. I used Rustoleum Dark Walnut stain, and Rustoleum Satin Poly for the finish. I bought the 4 chairs before I stained it so I could match the table to the chairs. I then made the matching bench and upholstered it myself to match the chairs. All in all, it looks like a complete set and I'm so happy with it!
It is very heavy...

Estimated Time Investment
Week Long Project (20 Hours or More)
Recommended Skill Level
Intermediate

Comments

Joni

Wed, 02/19/2014 - 08:24

This looks fantastic. I LOVE the hardware on the edges. I know how hard it is to match stains and you did a great job. The upholstered bench looks professionally done.

Modern Craft Talbe

Submitted by Anonymous (not verified) on Wed, 05/18/2016 - 13:26

The desk top measures 39" X 69". It extends 15" on one side, creating a counter overhang for a second crafter. The top is supported by a 1X3 frame fashioned after the desk design shared on Ana's brag post (pg. 7 as of this writing). The room has a tile floor, so adhesive-backed felt strips were placed on the bottom of the bookcase units, making it easier to pull the desk into the middle of the room should I need to access my work from both sides.

 

A lumber yard cut all the pieces. Next time I would use 1X12s for the two side pieces.

Built from Plan(s)
Estimated Cost
$220
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
MDF for table top. White wood for bookcases.
Recommended Skill Level
Beginner
Back