Community Brag Posts

This was a fun project that I made for my wife. I saw a Crate & Barrel table with legs that alternated directions. The plans were easily adapted to match. I stained the standard pine boards with Minwax Prestain, Minwax Red Mahogany stain (2 coats) and sealed with a matte polyeurathane. The matte finish cut down any shine and should prevent any fingerprints from showing up, though witha 2-year and 6-year old this is inevitable. I may still add some small 3-4" triangular braces on the ends of the table at the legs to add stability, but it seems quite stable as it is. The bench is next on the list, but this will have to wait until after Thanksgiving.

Our large lap dog finally discovered he could easily get whatever he wanted out of the trash, so I built the tilt out bin to help keep him out of trouble. lol. I made it cabinet height so we could move the microwave off the counter, and added a drawer to the extra space to keep garbage bags and such in.

I used the armless chair plan, and altered the one armed plans to make two chaises. Then I increased the size slightly to accommodate the 25x25 pillows I bought. This took about 12 hours with one person working. I am super proud of it! Finished today, and will eventually stain after the wood has dried out a little. Thank you, Ana, for making straightforward plans that gave me the confidence to do my first woodworking project!

Andrea in Michigan

Built a whole wall of work benches for my garage! Instead of one giant bench this is made as 3 separate benches, plus a rolling bench for the table saw. They are a combination of elements from 3 plans - - the Sturdy Work Bench, the Workbench to Get the Job Done, and the Simple Rolling Bar Cart.

The heights allow for the long pieces cut with the miter saw to rest on the side tables, and when using the table saw (it’s on wheels) the tables can catch the pieces as they push off from the back of the table saw. The bench top surfaces are at 36 ½” tall, which is the height of the “deck” of the table saw, and the miter saw table is 3 ½” shorter. The side table widths are sized to fit the wood on hand (one at 36” and one at 40”), and the center lower one is 40” wide to allow plenty of elbow room for cutting miters on the sliding miter saw. The table tops are 36” deep, which allows plenty of working room and space for the sliding miter saw. The table tops overhang 2” on the front and back.

The leg assemblies are made from scrap and left over wood from multiple projects we’ve done over the last couple of years, which includes regular and treated lumber (1x, 2x, and 4x4 pieces, and even some reclaimed 5/4 decking boards ripped down). The legs are a mixture of 2x4’s and 4x4 posts. The only lumber that wasn’t already on hand was some more 1x4’s for the shelf slats and the plywood for the tops. Since this is a work bench, the finish will remain au naturale. It does need some additional sanding on the sharp/pointy edges on the table tops though.

The blue caddy at the end of the left shelf holds my newest power tools – Ryobi One Plus 18V Airstrike nailer and compact drill/driver, with extra batteries. Woot!! Those came in really handy on this build!

For now the shelves have open bins and baskets, but the plan is to get closed (clear) bins with lids for all the things on the shelves, to protect everything from the sawdust.

The shelves are slatted so they wouldn’t gather such big piles of sawdust since the tables are open. I can just vacuum or use the blower at the bottom to remove the sawdust that falls through.

The table saw bench was an afternoon project, and the 3 benches took several hours spread out over 3 weekends. I'm delighted with how these turned out, and can't wait to use them for more projects!

Have made many of these as you can see.  The plan is easy to follow and easy to modify to suit your needs,  Wonderful site #anawhite

Built from the outdoor coffee table plans.

Changed the dimensions up a bit on the coffee table and shrunk them down to make matching end tables.

Changed the top layout and the bottom shelf a little bit. 

Thank you for the plans!!!

I wanted to attempt making a dining room table. This is my very first woodworking project. I did use store bought legs from one of the big box stores. Your site completely inspired me to just go for it. It's not quite finished. I've got to do all the sanding and staining. I plan to use a mahogany tone stain to coordinate with my brown/black parsons chairs and hutch in my dining room. Finally finished and I think it looks great! It took a lot of sanding to get all the wood pieces even, but so worth the effort. I love the rustic country look.

I have two girls and my youngest was getting out of a crib. I could build another bed or include both girls and build a bunk bed. I chose the bunk bed route with the approval of my wife and got started. I loved the plans from ana-white.com and decided to pull the trigger.
Total cost for bed not including the new full mattress was around $300. A huge savings from the estimated $1,500 from comparable beds on the market. This took me about 2 weeks total but that was a couple hours here and there. I would describe most of the work as beginner skill level but a couple of the steps had challenges but you could figure it out. My girls were out there helping me build and paint so it was also very memorable. Thank you again for all you do Ana.

Bobby

Best looking greenhouse and great size!

My attempt at the murphy bar featured on this site. Still have to add the sash locks. Added pallet crossmembers at the back, an x in the leg, and a french cleat to mount to the wall. 

This is my first project and I'm really pleased with how it turned out. I made two racks - one for adult size and one for the kids with a narrower gap between the dowels. Hardest part was routing the back to make the French cleat hanger slightly recessed so that the board would hang near the wall. It also took me a while to make the large drill bit work ok and I had to start over on the other side of the board when it chewed up some of the edge of the initial holes. I used an excel file to figure out the spacing and amount of materials. Thank you Ana for the inspiration and detailed instructions. Definitely given me the woodworking bug now.