Community Brag Posts

We have a small house. Okay, a TINY house. We just added a new baby to the mix, had a 5th birthday and Christmas, and suddenly, every room seems more cramped. We knew we needed more storage in our oldest son's room, and this seemed like the best solution!

We used the plans for the bed to a T, and then did the bookshelf on the end to match. We then created a custom plan for shelves underneath, just the right size to accommodate the blue and green fabric bins you see. We also left some spaces for bigger toys, and added a hamper to keep taller toys (swords and such) organized.

We loved the look of the bed painted white in the picture, and since his walls were already practically the same color blue (and a green accent wall), we decided not to stray far from the original design.

Our son loves the bed, and we are thrilled with all the space he has in there now!

We estimated about $350 on the bed, that included the wood, screws, 2 gals Valspar paint, paint accessories, and the fabric bins and hamper.

This project was a bit of a challenge. My garage has uneven flooring and a concrete lip around the edge of wall so I had to make the back legs 10 inches shorter than the front. Overall, it turned out well and everything is completely leveled much to my amazement. I'm thinking of making more shelves on the other end of the garage to free up more space.

I designed and built this chiffarobe based off of the mirrored wardrobe plans provided by Ana White.  I received a Kreg jig for Christmas and immediately put it to use.  We used 1x12's for the top sides and back to make it narrower for our entryway.  My wife did an excellent job painting it green with brown distressed look.

Calling myself an amateur builder is a colossal overstatement. I’ve never actually built anything, by hand, using wood. I’m quite crafty and very good at hacking things inspired by others {thank you all other bloggers and Pinterest for your continued inspiration}, but to actually build something from the ground up just hasn’t been added to the curriculum vitae…until now.

I actually hail from a family of handy builders. My grandpa used to build everything, from decorative shelves and stools to more utilitarian items, like bookcases and kitchen cabinets. My father, too, is quite handy; he’s the build-a-back-deck weekend warrior type.

This was my first Weekend Warrior project. My deadline: Thanksgiving dinner! I had no other table option. I either built this table or my friends and family were eating on the floor.

Hello everyone and thank you Ana-White for all of your plans.  I love this site and have built several pieces of furniture for our home from them. 

This bed is absolutely Rock Solid! In reading the blog I noticed several people asking for the "modified" dimensions or resizing for a standard king ( I put them in the blog but this is what I did)

Headboard: 9 1x8's at 30 inches long and 2 1'x6's at 30 inches long (I omitted the 1x3 end pieces at 30 inches and that way I had 76 inches wide.

The plans call for the 1x4 panel trip pieces (for headboard and foot board) to be 80''.  I resized them to 76''

The headboard 4x4 legs were still 54''

The bottom headers 2x4's for both the headboard and footboard calls for 87''...I changed it to 83''.

The top header 2x6's  for both the headboard and footboard call for 89''...I changed those to 85''.

The plan calls for the footboard to have 10 1x8 panel pieces at 15 inches. like the headboard I changed these to 9 1x8's at 15'' and 2 1x6's at 15''.

We have a new 12'' memory foam mattress so I did like others and used 2x4's for cross beams secured with truss hangers and then used peg board for additional support.  The side rails are 2x12's at 62' ( I wanted a little extra room to be able to bolt them to the head and foot board.)

NOTE: The cut list calls for 4 1x8's  You Need 5.  And to do the plans my way you need a few 1x6's.

Sorry if this is wordy but I hope it helps!

Thanks Ana for all of your awesome plans!  My Fiance' loves the furniture and I am addicted to building because of you!

Dave

Needed a storage spot in the living room to hide the wii remotes/games and the iRobot mop, while allowing easy access and charging capabilities. This piece fit the bill and looks beautiful!  

We cut a hole in the back, in front of an outlet, and placed a power/USB strip inside the cabinet. 

Used routed plywood scraps for the false drawer fronts and they look so real that everyone tries to pull open a drawer rather than swing open a door :)

NOTE:  The cut list in the plans say to cut the 1x3s for the decorative top @ 35.5". They should be 37" each, which we realized after cutting and went to put the cabinet together :(

I made two little doll beds, complete with bedding, for my two little granddaughters and decorated to suggest 'Swedish Country'. I had such fun making them. I'm going to post them with the rails disassembled so they can be easily rescrewed together.

I reused lots of bits and pieces of wood I had on hand to make the bed. I also used paint and small pieces of fabric I had on hand for the bedding.

The girls are only 20 months and 4 years old and they both play with baby dolls constantly. The four year old has only just started to get interested in American Girl Dolls. I made the beds, thinking of the baby dolls, but big enough for 18 inch dolls, later on.

I had a horrible time finding an outdoor sectional that fit in my sunroom and didn't cost a fortune, so I adapted the Storage Sofa plan to work for my needs!

It took a couple of weekends, but I didn't work straight through both days - I would do one task at a time; cut all pieces, assemble boxes, stain, put together cushions, install in sunroom.

I used my kreg jig for as much as I could, and adapted from the original plan to leave the backrest open to give it a more outdoor look.  

This was my first project ever. I had a lot of fun and it didn't quite turn out right but next time it will be perfect.

This was a great project to begin with. I used pocket holes instead of finishing nails. I also added another shelf and trim work.

thanks for the plans! Took me about three hours to build, sand and stain!

Our new place has a kitchen island, so we needed stools. We had been searching the internet for vintage drafting stools, but could not justify spending over $200 a stool. We stopped at the local Goodwill and found two stools for $7 a piece. To make it even better they were on sale. We spent under $10 for the two.

Check out my blog for more photos of the process.

Super easy. Under $50 .. wanted an industrial look to match new shelves, and could storage laundry baskets. Wanted a certain width / color. Added extra pieces to bottom shelves to create a cubble shelve.

Love the outcome!

Here is my try at your table. I skipped the x's on the sides. 

Greetings from Brazil. Thank you very much for the dollhouse bookcase plans. I did it to my goddaughter and she love it!