Community Brag Posts

This is the final installment (#6) in the doll bed and high chair sets I've been building my great nieces. Each set was decorated with a lamb water-slip decal on the end of the bed (kind of a little theme going). This is the second crib I've built with dowels - I usually use 1" x 2"s - and I learned to use a spade drill bit rather than a regular drill bit. It doesn't split the wood around the holes. I've had a lot of fun building these for my nieces, and now I may have to start building them for my friends' children and grandchildren. :-)

The angles were very challenging. I wanted to replicate the angles of 55 degrees. But of course my saw wouldn't cut them. So I made a quick jig for my miter saw that allowed the supports to be cut on their side just 10 degrees off 45 degrees equaling 55.

I have hunted for the perfect dining room bench for my large family but they were either to poorly crafted to withstand my crew, to small, or to pricey. Then I found this site showed the farm house bench to my husband and he said, "Hey I can build that!" and build it he did. He changed a few things here and there but the overall finished bench is AMAZING, and I LOVE IT!!! Thanks Ana!

I absolutely love my rendition of the Fancy X Farmhouse Table (and bench).  I took Ana's plans and combined them with some of the details from charmingimperfections.com to create the vision in my mind of exactly what i wanted.  The build was not bad at all but the Kreg Jig is a MUST have tool!  This was my frst experience with the KREG jig and i am now looking forward to many more DIY Builds! :)

I purchased a harvest table from a local store that sells only solid wood furniture.  The store had the option of purchasing a bench.  I decided that I could save some cash and make the harvest bench myself.

For details, check out my blog - http://www.woodworkingfourdummies.com/blog/harvest-bench

Cheers,

Ian

We took the plans for the twin headboard modification and added an x brace to make it look like a barn door.  We also added a piece to the bottom for additional support for mounting to the boxspring as well as to prevent warping and narrowing of the posts.  

This took me an afternoon because I have never used a compound mitre saw before so I was teaching myself through trial & error.
It was really fun to try and I will definitly be making more!

Fun build.  Took me a few weeks but enjoyed it.  Gave a ton of storage for my sons room.

I made this garden trellis with cheap 6' cedar fence pickets ripped down to 1 1/2" strips. Get the free plans and tutorial at The Handyman's Daughter!

From the club house plans. I did go ahead kreg jig all the panels on the front and back walls.

All the art work in the sign and on the steps i used a dremel and dug out and painted everything.

Came out beautiful.

Made so was easy to transports in parts to get up and down stairs in 8 pieces.

I built this as a Christmas gift. I used Minwax honey oak stain for the top and bottom shelf. 

My first woodworking project since building a mug tree in school (I was about 12). This project started in the holiday break after I received a Kreg Jig as a gift, and this seemed like a good first project to tackle. We have a little boy about 20 months old who LOVES to help out, needed something more sturdy than standing on a chair, and this fit the bill perfectly.

I modified the design very slightly to ensure that the tower fits neatly under our kitchen island so that it stows mostly out of the way. That necessitated removing one of the "levels", and altering the dimensions somewhat to keep it proportional.

The biggest challenge of all was painting at the end! Made the mistake of using a spray can first, which made the wood fuzzy. So, sanded it all again, added primer (originally it was black), and then a couple of layers of white semi-gloss/enamel. Need to improve my painting technique to avoid brush marks in the future.

I made this little tool caddy in one afternoon from some 1 by various width board scraps.  I pretty much followed Ana's 'Give the Gift of Building' plan for construction, while being able to use up some scrap wood.  I was making this as a 'just because' gift for my BFF, so I made it to fit three of those free little floral vases, filled it with flowers from my yard, and voilà! 

This is a great beginner project, or one for anyone who needs a little something to project during a free afternoon.

I only was able to complete this project for less than $10 because I happened to have most of the supplies I needed lying around the house already. If this isn't the case for you, it will cost slightly more, but not much.

I had 2 extra 12x12" mirror tiles left over from another project that I've been saving for something creative. When I saw the plans for this picture frame I knew I had a winner. I figured out how much wood I needed and purchased the cheapest type I could that wasn't warped. Since I wanted a bit of the "weathered" look, I didn't mind wood with knots in it. I followed the original plan exactly, the only exception being the specific measurements I knew I needed to fit these mirrors. I also had some extra burlap lying around and made my own stencils for my "M" and "L" monogram letters. After cutting them out, I simply hot glued them directly to the mirrors. Finally, I attached the mirrors to the back of the frames and hung them in place!

I originally wanted more of a rustic look with the paint (similar to the original blue one), but I think the burlap brings that in enough. Overall, I'm very happy with how this turned out!