Community Brag Posts

American Girl Doll House

Submitted by Anonymous (not verified) on Sat, 11/06/2021 - 08:04

This was what I built for my daughter during quarantine! I had never used a Kreg Jig before and now I love using it!

Comments

Modified Spa Bench

Submitted by michellek on Sat, 04/02/2011 - 22:01

This is my first build ever...except for a rad cd rack I built in 8th grade shop class.  My husband and I team-worked it as a date in his dad's garage. 

So it all started when my amazingly crafty friend Lee built a toy kitchen for her kids.  I was so impressed and started looking up other people's diy kitchens.  So then I was searching for something totally different and saw the play kitchen on Ana's website (love it), and I got totally addicted and decided I was going to build a dining room table, because we have been using a hand-me-down brown card table and chairs from the 70's since we got married.  (How's that for a run-on sentence?)  I wasn't sure if my husband would take me very seriously, but after I showed him this website, I started noticing him on it all the time.  He's more addicted than I am! 

Fast forward some time and we decided to start with the spa bench as a warm-up.  Once we are in a house with our own garage (God willing in the next few months), we plan on tackling the Farmhouse Table.  Anyway, when we took the kids to Gma and Gpa's, my father-in-law got really excited that there were going to be carpenters in the family, and he took us out to the garage to show us all his tools that we could use. 

We had to buy all of the wood, screws, sand paper, stain, polyurethane, and a paint brush since it was our first project, so it ended up costing about $85.  At least now we have a lot of supplies left over for our future projects!  We had Home Depot make the cuts for us so that we could fit the wood in our car.  We used 1x4s instead of 1x3s because we didn't know that 1x3s were furring strips and not in the same place, but now we know.  :)  We also bought one warped board, which was a total pain.  Don't do that. 

This is probably a weekend project if you count the staining and finisher.  The actual building part only took us three or four hours (please don't laugh at us if that's painfully slow), but we actually took about two weeks to finish it because we have rain, no garage, and three kids under 19 months.  And we weren't really in a hurry.  Anyway, it was fun.  We like to build.  Thanks, Ana, for inspiring us and for making it doable for so many people!  We think you're neat.

Built from Plan(s)
Estimated Cost
$20-$85
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
We used one coat of Jacobean 2750 Minwax Wood Finish for the stain and then two coats of Minwax Fast-Drying Polyurethane (clear satin).
Recommended Skill Level
Starter Project

Seesaw

Submitted by KimmoPT on Wed, 06/12/2013 - 02:38

Greetings from Finland. I made teeter-totter from excellent plans Ana has donatet for all of us. I used treated wood, so I didn't need to paint the project (and never will :-) Handles and seats are made from raw wood. Gives also nice twin color look. To add some extra support I embed the beams at foot.

Built from Plan(s)
Estimated Cost
37€
Estimated Time Investment
Afternoon Project (3-6 Hours)
Recommended Skill Level
Beginner

Comments

Seasonal And Holiday

Desk with additions

Submitted by klatz on Fri, 05/15/2015 - 09:25

This was the first plans we used from Ana White and it turned out great. Modified the desk to be a little shorter and have dual drawers in the front.

Built from Plan(s)
Estimated Cost
$125
Estimated Time Investment
Weekend Project (10-20 Hours)
Recommended Skill Level
Beginner

Comments

Farm Table

Submitted by Anonymous (not verified) on Mon, 11/15/2021 - 14:06

Anna made it easy to build. I did change a few things to fit my dining room but I think it turned out great.

Thanks Anna

Shawn Roleson

Comments

Anastasia's new bed

Submitted by dave on Mon, 04/04/2011 - 18:57

This is my daughters new bed. We modified the plans to fit what we wanted. I added drawers to the stairs. Then put shelves behind the stairs. Added doors so we can hide the shelves. We used rope lights inside to add light with her own light switch.

PS Don't mind the date on the pictures. Forgot to change the date.

Estimated Cost
450.00 USD
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
We routed all edges to round them over and sanded.
Then primed and painted. We used a hvlp paint sprayer.
Recommended Skill Level
Intermediate

Tryde Coffee Table

This was my first project. We are using it in the Man Cave.

Estimated Time Investment
Afternoon Project (3-6 Hours)
Recommended Skill Level
Beginner

Comments

Poolside sectional

Submitted by Littlek8 on Tue, 05/19/2015 - 09:55

This was our first diy furniture project but definitely not our last. We were looking for furniture to put by our pool but everything that we liked and was comfortable was way out of our budget. I came across the post on pintrest and recruited my husband to do the woodworking for me. I the meantime I made the cushions and back pillows using outdoor fabric from fabric.com. The sectional is stained using Olympic Elite semi transparent exterior stain in kona brown.

Estimated Cost
$500.00
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Olympic Elite semi transparent stain in kona brown. Topcoat of Helmsman polyurethane
Recommended Skill Level
Beginner

Comments

Tree Shelf

Submitted by Alaskagirl on Tue, 12/12/2017 - 22:59

We moved about 18 months ago to a house without a fireplace after having one for almost 7 years. When The Christmas dilemma of where to hang the stockings came up last year, we used an Ana White plan and built a super amazing faux fireplace. After the holidays we decided we'd install it in our bedroom instead of storing it away all year....AND we ended up liking it there so much, that's where it stayed and a bookshelf took its spot in the living room. This Christmas when the stocking question was raised I looked online for ideas and, wouldn't you know it, Ana White to the rescue again!! We are completely in love with our new Christmas shelf. Also as a bonus, we now know how to use a miter saw, which I'm sure will open up all kinds of new project possibilities!

Happy Holidays!

Built from Plan(s)
Estimated Cost
$30
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
Weathered gray stain with a bit of teal paint mixed in followed by a clear varnish.
Recommended Skill Level
Intermediate

Crib Mattress Sofa Sectional

Submitted by Anonymous (not verified) on Wed, 11/24/2021 - 14:15

I used Ana's outdoor sofa plans to customize this sofa for a playhouse. I left the separate railing piece detached so the kiddos could push the two pieces together to form a bed for sleepovers!

Comments

Simple Nightstands

I absolutely love the way these turned out! I drew up an example in Sketch-up using Ana's plans for the Simple Nightstand as a starting point. 

The top is made from 5 boards, 19 inches in length, joined together underneath with a kreg jig. I made two of these, identical. Each nightstand took exactly 50 kreg screws, not intentional, it just worked out that way. I used a brad nailer to attach the trim along the bottom shelf (which I could have avoided with a a little more planning in the beginning), also to attach the side panels that you see on the sides and back, and to assemble the majority of the drawer, using kreg screws to attach the front.
I'm in love with the drawer pulls, a metal twig shape bought at blue! I'm debating whether or not I want to paint them with some brown paint and distress them a little bit, but not sure if it would just end up looking hokey since they are obviously not real twigs.
It took me several hours to build these, mostly because I had to kind of work out a few details as I went, but I'm confident I could do it quicker if I had to do it again. The finishing is what takes the longest!
Built from Plan(s)
Estimated Cost
$110 includes enough Select Pine, kreg jig screws, and drawer pulls to make two nightstands
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Two coats of Cabot stain, Pecan color. Three coats of satin polyurethane, with a light sanding between each coat.
Recommended Skill Level
Intermediate

Farmhouse Style Bed

It took about 7 hours to complete this project. We used Ana White's Farmhouse Queen plans, with some modifications: the bottom of her bed frame is about 4-6 inches off the floor, ours is 17 inches for extra storage space. We also made the footboard slightly deeper to accommodate longer legs. Due to limited space, we built it on the bed of our truck with the "help" of our 18 month old. We love the way it turned out.

Built from Plan(s)
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Unfinished
Recommended Skill Level
Beginner

2x4 garage shelving

Submitted by mjberger85 on Sat, 05/23/2015 - 15:07

I built this to fit inside a closet that I have in my garage to store all my camping stuff. I built it 5 feet long so I only had to buy 2x4s that were 10 feet long. I also built the bottom shelf closer to the ground to allow just a little bit more space between the first and second shelf. All in all it was a very easy and fulfilling project. I was a little worried about how sturdy the shelves would be but they are very solid. Thanks Ana!

Estimated Cost
$60
Estimated Time Investment
An Hour or Two (0-2 Hours)
Recommended Skill Level
Beginner

Comments

Faux fireplace with hidden storage

Submitted by Amymesser on Mon, 12/18/2017 - 05:59

I saw this project on the Ana-white website DIY. Luckily I have a friend that has all the tools so we used the cut list & built this faux media cabinet fireplace. I wanted it to store all my media stuff & have my TV set on top instead of the boring & expensive hanging the tv on the wall route not to mention the damage to my rented apt wall. We made a few modifications we extended the top & moved the center hidden shelf up. 

Estimated Cost
$400
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Painted white
Recommended Skill Level
Starter Project

My amazing husband surprised me

Submitted by Anonymous (not verified) on Tue, 12/07/2021 - 10:14

My amazing husband surprised me with this awesome headboard for my birthday!❤️ ❤️

Comments

Bathroom Tower out of scraps

When I saw another builder's little bathroom tower in the brag blog last week,  I knew I needed one for my powder room! Ever since we installed a pedestal sink several years ago, we've had nowhere to put extra toilet paper. With this little tower, that problem is (finally) solved!

I built it will materials I had on hand. Oak plywood I ripped to 11" for the sides and shelves, 1x2 pine for the face frame, and a variety of pine for the top glued and screwed together with my Kreg jig.

The only purchase I made for this tower was the two fabric baskets from Target for about $12, I think. The fact that they fit is not a happy accident -- I built the unit around the basket dimensions.

While it is inspired by Ana's storage tower plans, I definitely went out on my own to make it work with the materials I had lying around.

Built from Plan(s)
Estimated Cost
Almost free.
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
The paint is Benjamin Moore Hancock Grey. I picked up a gallon for $5 at the ReStore and cut it with white to paint my bathroom walls and used it full strength for the storage tower. The top is a mixture of stains -- some pecan, some ebony, and some nutmeg. I kept mixing until I got the color I wanted and then applied several coats to get the depth of color I was looking for. I also distressed the top before staining. The whole thing is coated with Krylon satin clear coat.
Recommended Skill Level
Starter Project

child airplane swing

Submitted by landseer on Tue, 06/18/2013 - 12:11

Airplane swing made from pine and "A" frame made from 2x4's

Built from Plan(s)
Estimated Cost
$80
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Rustoleum outdoor paint in Patriotic red,white ,black. Plus Navy stickers.
Recommended Skill Level
Intermediate