Community Brag Posts

Came across this plan as my first wood working project. Took the corner brackets to a different level, spoke with a local blacksmith who created the brackets for me to give it a more rustic feel.  Created the nails, same way they were done in the early 1800's.

Total time took me longer than normal since this was my first project.  Otherise I could see hammering out one of these a day (excluding waiting for stain to dry)

Very excited to keep going, thanks for the great site Anna!

My first build I ever did back early 2016. 

My wife and I are expecting our first child, a baby girl, in September. I decided that I was going to make as much of the furniture as possible, and started with this dresser/changing table.

This is the first project I've made with drawers, and they were a bit of a challenge. Other than that building the dresser was straight forward. The drawer fronts are made from up-cycled deck boards and the knobs are from Anthropologie

I really like the legs of this table but wanted a square, planked top.  I also used a stencil that I got from amazon for the design.

I was making the fancy x desk, and my wife suggested building a bench to go with it to make it a bar style kitchen table to take up less space in our kitchen. So I looked up plans for a bench on here (providence bench looked best with it), and built it. I painted it with rust-oleum American accents spray paint for wood, metal, and plastic in glossy black and surprisingly it looked amazing!

This is my first project, just to see if I could actually build something. I used some wood and paint we had lying around the garage, since I didn't want to put money into something I might screw up! This turned out to be pretty easy, despite the wood being a little warped from sitting in the garage for years. It's not perfect, but now I have a place to store my husband's golf magazines that were cluttering up the bathroom -- and the courage to try something bigger!

My take on the Mini Farmhouse Bedside Table using a combination of new and repurposed pine.  Using a 3/8” round over bit and router I softened the edges of the top and the shelf.  I substituted a ‘plank’ look on the sides instead of the solid flat which the plan calls for.  Finished with a scuffed paint and contrasting dark stain which makes the piece stand out.  

I altered the dimensions slightly so that it wouldn't be overbearing in my living room. It is much shorter than the plan suggests, and the length and width are also changed. I used framing 2x4 and 2x6 lumber, so I had to sand the heck out of it to make it nice and smooth. It looks great next to the console table. Good plan.

Friends asked me to design a princess/castle bed for their daughter. It needed to fit a single/twin size mattress and fit a 61 inch space they had so I designed the overall width to be 60 inches.

It is all made from solid planks apart from the two big shelves in the headboard which are plywood.

They wanted the sides close to the headboard to be raised as well so their little girl didn't roll out the bed.

Not added the slats yet as it is off to the paint shop to be sprayed Pink!! I will post more photos once painted and will also post plans soon once finished them.

Hope the little girl likes it when she sees it.

I made the plans a little different. I had more support to the front, made the base wider, and added swivel wheels instead of rockers.

Super easy to follow and build! We went with treated lumber from Home Depot and have around $1500 into the project. Will be looking at adding an automatic fan and thermostat next year. Benches on one side for starters and a raised bed on the other side.

Build Instructions: https://www.instructables.com/id/Bluebird-Birdhouse-Made-From-Pallets/

This is a very easy project to make for attracting bluebirds to your yard. I wanted to reuse some of the wood I have from with the pallets I broke apart last year. This project uses a combination of industrial strength pallets made from 2x6s and standard pallets which provide slats in the 3/8" to 1/2" thick range. As for the house, I tried to hit the basic bluebird birdhouse dimensions for this build:

• Hole Entry Size: 1.5"
• Hole Distance Above Floor: 6" to 7"
• Floor Dimensions: 4"x 4" to 5" x 5"

Feel free to leave the birdhouse exterior to weather unfinished or stain/paint it. I finished the house with a combination of stain for the bottom and sides and green paint for the roof.

Tryde Coffee Table made of mahogany and stained used several layers of boiled linseed oil and a few top coat layers of wipe on satin polyurethane. It came out really nice. This is my first project.