Community Brag Posts

This was my second project. I built it with my hubs and we had a blast. We have a boxspring so we used 2x6s, but laid them flat. We also used 2x12s for the sides and instead of attatching the sides permanantly we used bed hooks that we ordered online to attatch the sides. 4x4s were impossible to find. We ended up buying treated ones and sanding them for ages.

Fun to build

Great, beefy chair with a rustic look around the poker table with side tables (another project that took longer than anticipated); the plans were great and easy to follow. I made a few modifications:

- Reduced the width from 19" to 16" to fit around the table.
- Made the seat out of 1x4's horizontally mounted with an extra support underneath. It helps to keep the cushions from sliding and I liked the look.
- Rather than pocket holes I counter-sunk and used oak plugs.

I did the whole thing assembly-line style creating "kits" as I went along. That allowed me to make jigs for each cut so things were reasonable close from chair to chair. Also, I only made one attempt at the jigsaw cut for the rear angle...the jigsaw got very upset. For the rest, I used the chop saw to make little slices and then chiseled and sanded.

Two coats of Danish Oil on everything gave me the look I was trying for, kind of the back-room-in-an-old-John-Wayne-cowboy-movie vibe. Leave your pistols at the bar.

The times and costs are per chair, the whole thing took a whole lot longer!

This is a corner entertainment stand. I didn't have a plan to follow so I made it up as I went. The dimensions are 40" L xW and 27" tall. It has a base hidden underneath it help support the weight and is also screwed into wall studs to prevent tipping. The angle for the front cross section is 22.5 degrees. I made this for a friend. She is going to paint it unfortunately. Materials cost only around $120. 3 sheets 3/4" plywood, some 1x2s and a couple hinges and cabinet knobs.

This project was built with a round top from a broken table and two 2x4’s. The top in this project is 30 inches in diameter. However, the designed can be scaled up or down based on your top diameter and/or desired table height. See drawing and video for build instructions.

Build Instructions:
http://www.instructables.com/id/Simple-Round-Table/

Video:
https://www.youtube.com/watch?v=CZGR2giAIv8

Drawing:
https://drive.google.com/file/d/0B21TbB8gGNQbeG96QVdsNGNKZHc/edit?usp=s…

Additional inspiration from here http://www.mylove2create.com/2015/07/farmhouse-storage-bed.html?m=1

Access to storage area under mattress via sliding doors at foot. Soft-close slides on all drawers and storage access. Modified plans for king mattress. Head and foot board attached using bolts and threaded inserts for easy disassembly. 

This is my first project. I'm so happy with the results. We turned this potting bench into an outdoor bar. :)

I made this shelf quite some time ago. I changed quite a few aspects of it as I went a long and I am quite happy with the finished product. Thanks again to Ana for the rockin plans.

Had some leftover v groove planks from building a plank wall in son's room, so decided to make Ana White's cute Joy sign.  Had trouble finding a boxwood wreath that I liked, so ordered one from Home Depot.  It came in only 2 days.  Super simple and super cute.

This build was not hard, but just took time. The plans were perfect. Clear, easy to follow and correct. 

Materials cost about $400. 

This was a fun project because my 8 years old son got to help build his bed. I used a brad nailer to hold many pieces together after they were glued. Not a must, but it made the build a lot easier.  It also came in very handy when making the shelves.

We also added IKEA LED lights underneath the bed for a cool effect.  

I built this toybox for my son's first birthday. It took about a week to do, starting and stopping. I got Lowes to cut the plywood for me, and screwed everything together. Wood filler filled the countersunk holes, and a coat of primer and two coats of paint finished it off.

After everything dried, my wife added the name and crown in vinyl cut out using her Cricut.

My (excited!) first time building a piece for someone else. This table was made as a housewarming gift for some awesome friends. Many people contributed to material cost and my husband and I put it together.

The table is made out of all cedar to deal with the southern rain and sun (we haven't had a dry day since we delivered it a month ago, so you get a wet but sunny picture - yay hurricane season)

We modified the plans to incorporate two planter buckets for icing drinks and such. This required us to make two longitudinal frames instead of the one used in the original plans. We spaced the frames just enough to fit the planters down in them, then added short 1x2s between them to support the planters. Before boarding the top 2x6s together, I made rough cuts for the openings. When it was all together, my husband used a 2" router bit to clean up the edges of the holes.

Made the 8 foot FancyX benches to have as much seating room as possible for lots of friends and family. Looking forward to using it more when the weather dries up a little.

Ended up making mine 8x4 to fit between 2 windows on the side of the house. I put in a paver base and then built a 2x4 floor with three quarter inch plywood. 

I drew everything our first so I knew what to order from HD. I followed the plans basically but used 2x4s in the frame of the walls and back. I just used plywood on the back wall. We also can't get cedar fence planks in south Florida, only 6 ft pine pickets, so I made due. 

The roof I had to measure once the frame was up, just to be sure.  Also used a 2x6 as the cross brace on the front...wanted to make sure it was strong enough to prevent the doors from pulling in and sagging, since they're bigger. 

Tools:. Pocket hole jig is a must. And I did this completely solo, so air nailers were a 100% must. Frame nailer and Brad nailer with various size nails. I still may add angled brace 2x4 across the top interior to hold the square. Shingled the roof and added a little $9 solar powered light bulb, with a little panel wired to the roof. Works well. Still needs sealed and shingles trimmed but I get a lot of compliments on this thing. Turned out very impressive. 

Cost of everything.....around $400. Time, doing it solo seriously took like 3 days...probably about 25 hours for everything excluding paver base. 

This has been a project all summer and I was so excited to find that Ana had made a mantle. I had to make it bigger and I had so much fun making it! Thank you Ana!!!