Community Brag Posts

Two-tone kingsize bed- extra tall

My First Project

My husband and I had a problem.  We were tired of sleeping on a mattress on the floor, and most beds were out of the question because my husband is tall. 6'7" tall.  Ana White's plan looked perfect, but I had never built anything before, unless you count an improvised 'clean the gutters from the ground" stick.

I knew I had to make something that could be taken apart because we are renters right now, so it will take a little bit of work, but after some modifications to the plans, it will come apart when it needs to.  We are also not small big humans, so the bed is appropriately beefed up where it needed to be- to accommodate 2 big humans, 2 fairly large dogs, 150 lb latex foam mattress, and any future kids.

I also had to make changes to the King size plans because Ana's original plans have the mattress oriented sideways, which would be too short for us.

For extra storage space, a hangout for dust bunnies and dogs, and a just a plain tall bed for tall people, I made the foot-board posts taller, and attached the rails higher than the plans indicate.  I also made a platform for our mattress to sit on out of 2x4's, 2x6's, and 3/4" plywood.  This bed is STURDY.

To support the slats and mattress well, I hung a 2x6 with joist hangers in the middle of the bed frame (see picture below), and it stops the 2x4 slats and plywood from bending in the middle.

Built from Plan(s)
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
The panel boards were stained with two coats of Minwax Dark Walnut for 15 minutes each time before attaching the trim. Wood conditioner was applied before the first coat of stain.

Poly coat to be applied... later. When we will be away for a couple days after applying it.
Recommended Skill Level
Starter Project

rustic x table set

I built the whole rustic x table set. I mixed apple cider vinegar with steel wool, let it set overnight, and stained the tables with that. Then I put minwax polyurethane clear gloss coat on it. I then cut the corner angle pieces out of scrap 1 16th inch flat metal bars, bent them at a 90 degree angle and painted them black

Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
used apple cider vinegar and steel wool let it set overnight then finished with minwax polyurethane in clear gloss
Recommended Skill Level
Intermediate

DIY Workbench on wheels

Thanks to www.shanty-2-chic.com for this plan! I needed a workbench for all these projects that I was starting and I was tired of getting out a piece of plywood and the sawhorses every time. So this was just perfect for what I needed!

Estimated Time Investment
Afternoon Project (3-6 Hours)
Recommended Skill Level
Beginner

Bathroom Vanity 2 Ways, Hammered Copper or Wave Sink

Custom Bathroom Vanity in traditional furniture styling. Designed two ways, one with a hand hammered copper sink and matching hardware, the other with a Kohler Wave sink with black aged hardware. 

Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Ultra White Paint, Special Walnut Stain
Recommended Skill Level
Intermediate

Table turned cabinet

I had an old table that was in my basement.  I wanted to re-do my craft room.  I have been thinking and thinking about it.  So when I saw Ana’s link to her drawer organizer – and how to install drawer slides – I thought – ok – now it’s time to do it.

 

I spent about a week drafting plans, making measurements.  At first I was going to recycle the metal sliders I had left over from the kids dressers…but there wasn’t enough – and to do 12 drawers would be more money than I wanted to spend.

 

So – a trip to home depot – I was able to take this table that was just collecting junk – literally – to an organized and functional crafting cabinet – with huge deep drawers.  There are 12 drawers in total.  They are all 6 inch in height, 26 inches deep, and then there are 8 that are 16 inches wide, and 4 that are 12 inches wide.

 

Here are some before and after pictures – I have all the details on the build on my blog.  I wouldn’t have been able to do it without Ana.  Her plans and continual inspiration!

Estimated Cost
Around $80
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
On the fronts of the drawers only. Sanded, primed and painted with high gloss white.
Recommended Skill Level
Intermediate

American Girl Doll House

Submitted by Anonymous (not verified) on Sat, 11/06/2021 - 08:04

This was what I built for my daughter during quarantine! I had never used a Kreg Jig before and now I love using it!

Comments

Playhouse Loft Bed

This is my first KOW project...I built the playhouse loft bed for my daughter, Kayla.  She named it Lofty Cottage.  I used leftover pink paint from painting her table and chair set for the inside of the playhouse.  I made the letterbox from scraps and the half-door from the door cutout.  I added hardware that matches the hardware on her other furniture.  I made the banner by hand and hand painted the birdhouse and the sign.  She loves it!  Thanks for the great plans Ana!  Can't wait to start on something new now!

Recommended Skill Level
Intermediate

Seesaw

Submitted by KimmoPT on Wed, 06/12/2013 - 02:38

Greetings from Finland. I made teeter-totter from excellent plans Ana has donatet for all of us. I used treated wood, so I didn't need to paint the project (and never will :-) Handles and seats are made from raw wood. Gives also nice twin color look. To add some extra support I embed the beams at foot.

Built from Plan(s)
Estimated Cost
37€
Estimated Time Investment
Afternoon Project (3-6 Hours)
Recommended Skill Level
Beginner

Comments

Seasonal And Holiday

Desk with additions

Submitted by klatz on Fri, 05/15/2015 - 09:25

This was the first plans we used from Ana White and it turned out great. Modified the desk to be a little shorter and have dual drawers in the front.

Built from Plan(s)
Estimated Cost
$125
Estimated Time Investment
Weekend Project (10-20 Hours)
Recommended Skill Level
Beginner

Comments

Farm Table

Submitted by Anonymous (not verified) on Mon, 11/15/2021 - 14:06

Anna made it easy to build. I did change a few things to fit my dining room but I think it turned out great.

Thanks Anna

Shawn Roleson

Comments

Farmhouse Daybed

I modified the regular farmhouse bed to a daybed for my daughters bedroom. All that is left now is to fill holes, paint, distress, and glaze :) I made the height of the front and back tall enough to fit a trundle I plan on making later. It is up on blocks right now so I could see what it will look like when completed. Will post an update once it is painted and assembled.

Built from Plan(s)
Recommended Skill Level
Beginner

Comments

suziewelker

Fri, 10/23/2020 - 23:52

I love this! I would love to build a twin size farmhouse daybed with trundle for my stepsons’ room. They are only only with me every few months, so I want to have beds for them but this would save a ton of room! I have tried to modify the Haley storage daybed and the farmhouse plans, but am new to this, so I’m having great difficulty. Also, since they are teens, I have twin XL mattresses. 39x80, so again, more modifications. Any help you can provide would be greatly appreciated! Thank you!

Tryde Coffee Table

This was my first project. We are using it in the Man Cave.

Estimated Time Investment
Afternoon Project (3-6 Hours)
Recommended Skill Level
Beginner

Comments

Poolside sectional

Submitted by Littlek8 on Tue, 05/19/2015 - 09:55

This was our first diy furniture project but definitely not our last. We were looking for furniture to put by our pool but everything that we liked and was comfortable was way out of our budget. I came across the post on pintrest and recruited my husband to do the woodworking for me. I the meantime I made the cushions and back pillows using outdoor fabric from fabric.com. The sectional is stained using Olympic Elite semi transparent exterior stain in kona brown.

Estimated Cost
$500.00
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Olympic Elite semi transparent stain in kona brown. Topcoat of Helmsman polyurethane
Recommended Skill Level
Beginner

Comments

Crib Mattress Sofa Sectional

Submitted by Anonymous (not verified) on Wed, 11/24/2021 - 14:15

I used Ana's outdoor sofa plans to customize this sofa for a playhouse. I left the separate railing piece detached so the kiddos could push the two pieces together to form a bed for sleepovers!

Comments

Kids Adirondack chairs

Submitted by redhead_61 on Fri, 04/08/2011 - 13:39

This was admittedly a little harder than I thought.  The first one turned out short of perfection trying to get things looking great.  The second one was better using a level and being more careful.  However, the fact that my nail gun totally went out halfway through made the project a long one.  But my kids LOVE them and they look so cute and luxurious out in my grass.  I love it. 

Built from Plan(s)
Estimated Cost
$10
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
off white paint and poly
Recommended Skill Level
Beginner

Farmhouse Style Bed

It took about 7 hours to complete this project. We used Ana White's Farmhouse Queen plans, with some modifications: the bottom of her bed frame is about 4-6 inches off the floor, ours is 17 inches for extra storage space. We also made the footboard slightly deeper to accommodate longer legs. Due to limited space, we built it on the bed of our truck with the "help" of our 18 month old. We love the way it turned out.

Built from Plan(s)
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Unfinished
Recommended Skill Level
Beginner

2x4 garage shelving

Submitted by mjberger85 on Sat, 05/23/2015 - 15:07

I built this to fit inside a closet that I have in my garage to store all my camping stuff. I built it 5 feet long so I only had to buy 2x4s that were 10 feet long. I also built the bottom shelf closer to the ground to allow just a little bit more space between the first and second shelf. All in all it was a very easy and fulfilling project. I was a little worried about how sturdy the shelves would be but they are very solid. Thanks Ana!

Estimated Cost
$60
Estimated Time Investment
An Hour or Two (0-2 Hours)
Recommended Skill Level
Beginner

Comments

Faux fireplace with hidden storage

Submitted by Amymesser on Mon, 12/18/2017 - 05:59

I saw this project on the Ana-white website DIY. Luckily I have a friend that has all the tools so we used the cut list & built this faux media cabinet fireplace. I wanted it to store all my media stuff & have my TV set on top instead of the boring & expensive hanging the tv on the wall route not to mention the damage to my rented apt wall. We made a few modifications we extended the top & moved the center hidden shelf up. 

Estimated Cost
$400
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Painted white
Recommended Skill Level
Starter Project

My amazing husband surprised me

Submitted by Anonymous (not verified) on Tue, 12/07/2021 - 10:14

My amazing husband surprised me with this awesome headboard for my birthday!❤️ ❤️

Comments