Built in a few hours and cleaned up seams with caulk. Finished it off with standard trim paint.
I created this desk using the Fancy X Desk plans, but I used a project panel for top.
Double upholstered toddler day bed
Tue, 01/08/2013 - 14:44
Say what???? This is awesome!!! I adore the fabric and how you put two beds together! Thank you so much for posting photos! Ana
Wed, 01/09/2013 - 08:55
I love the color combinations going on here! What paint is that on the walls? I want to do this for my sewing/guest room!
I started building built-in bookshelves based loosely on the LACK copy-cat plans Ana posted. I started getting to work on them and realized I needed a way to handle the 8' and 12' boards I have to cut down to make the parts. Back to the home store I went! This was an extremely easy project to put together. I used one sheet of cabinet grade plywood ($30) and had it cut down at the store on their giant saw and three furring strips (as described in the plans, about $1.50 each).
My cuts were:
Assembly at home was really fast. It took me 90 minutes, it would have been probably under an hour if I had the table already! I didn't like the folding brackets at the store, so I went with fixed cheap ones for now. I'll swap them later. You'll notice the saw sits a little lower than the side tables. I'm going to mount the saw to the table and I'll fine tune with that.
Back to the bookshelves!
I had so much fun building this!! It ended up being 80"L x 29"W x 40"H
I added a removeable center seperator to make it available for 2 dogs and a hinged top for easy cleaning. If you would like to know more, mssage me here! https://www.facebook.com/almshousecreations
Sat, 11/21/2020 - 13:10
I was about to ask the same thing. If there is any, I can not find them. Please post
I made this for my nephew for Christmas. I'm new to furniture building and this is only my second project. It was my first time using a jig saw and it turned out much nicer that I thought it would. I also tried out my new router on the stair treads. I just love the preppy colors and whimsical whale. I'm sure it will get lots of use.
Fri, 01/11/2013 - 08:34
Cute! I really like the finished look the routered treads give it.
These planters were really easy to make, and held up well all through the spring and summer. This was my first garden, and I was excited to try raised planters. I added some reinforcement to the middle just to keep everything together, and they were really sturdy! Thanks Ana!
This is the rustic x coffee & end table I used 2x4's for the X. I like the wider look of the 2x4's over the 1x's it adds more dimension to the table.
After searching retail stores for farmhouse tables and not liking the pricetags, my wife talked me into tackling this plan. (I'm glad she did) This is my finished product.
I made the breadboards extendable so we could add extra boards if we needed additional seats for guests.
Thu, 01/24/2013 - 12:03
I basically notched out the end apron so that 2x2's could slide through, then attached the 2x2's to the breadboard. I originally attached them so they were just under the edge of the breadboard, but have since changed it so that it goes about halfway. I hope you understand what I am trying to say, if not I can add some more pictures.
Sat, 05/18/2013 - 06:55
Every time we visit websites, we saw almost the same as the other article and topic but I am shocked when I first read the title from this page. I never think that the blogger has the knowledge of making something new online. I only saw this kind of blog in this page. I concur that the blogger has the intellect of Albert Einstein. منتديات
Very happy with the results.
Fri, 11/14/2014 - 14:02
I really like the look of this! You did an awesome job!
Fri, 12/19/2014 - 17:33
How do you like the drawer pulls that you used? Do they hold up well? Great job on the project! I've started building this myself :)
First table!! I used all white pine that was milled over 45 years ago cut my own lumber out of this wood and the table top was made with 3 pieces of wood to make the top. Bench is being made now!
We used kristenlotz plans and AZCA33 style.
Fri, 01/18/2013 - 15:58
I love looking at the brag posts and seeing similar entertainment centers to the one we built! I am so glad people like our plans. It looks way good in white. I think we are going to re-do our doors and add the rope trim. I love how it looks. Just wondering, do you use the plans we posted at our woodworking blog at http://www.jrlwoodworking.com/2012/12/furniture-plans-custom-entertainm… ? I am so glad you built this. We love ours!
Liked the Griffen Reclaimed look Media console, but not the $1099 price tag that came with it! LOL
So with $100 and 3 hours of work, BAM!
70L x 15W x 30H
Thu, 12/08/2016 - 11:46
Great work! I used your piece as inspiration for a similair project that I added a fire place to!
http://www.rachovation.com/single-post/2016/12/01/Fire-Place-Console
This was the first furniture my husband built. He also did amatching sideboard table using Ana white plans.
Thanks for the plans. had fun building this. I made it a little higher and added an additional shelf. I wanted it to be rustic, so I beat it with a chain, hammer, and some screws. Used Early American stain. Used Rustoleum Triple Thick Poly satin finish. Not all straight and perfect, but it works. It matches the farmhouse table I built last year.
This is my first Ana White project. It was so fun to do and turned out really well. Thanks so much Ana for your great plans and help with building them. the Kreg jig is great!
Made from your Fancy X-desk plans. Dark Walnut & clear gloss polyacrylic Miniwax finishes.
I love your designs and could spend hours browsing here! But that doesn't get things built! ;)
I used your general plan to build this cute bench as my first project for my new Handywoman Business
I was easily able to adjust and customize it to my customers specifications and it is very sturdy. Also my first adventure in pocket holes and I am in love!
Organization is a constant struggle in our house and our junk drawer became more of a place to stick things when you didn't want them on the countertop than an actual funtional part of the kitchen. That won't change with the addition of the organizer, but it was nice to have it cleaned out.
In total, this only cost about $12 (for 3 drawers) and that was only because I used the S4S wood. My HD didn't carry 1x3 in anything else. May have been for the best because now I didn't have to sand anything.
The lesson learned from this project was that I should have cut everything to size instead of relying on the measurements of the drawer. The silverware drawer wasn't perfect and I will likely redo a little of it because the junk drawer turned out great.
