Community Brag Posts

A few years back, I built a twin version of Ana's Farmhouse Storage Bed for my step-daughter. After she moved out, I converted it to a huge toychest for my three-year-old.

I would have left it as a bed, but with a quality mattress it was so high I was afraid he could get hurt if he fell out.

The conversion is simple. Remove 24 screws, reconfigure, add back the screws in different places. The support blocks become feet for the chest, and the slats become spacers under the top part. 

He loves being able to get his toys out himself, and I love that he can put them away by himself. A big upgrade over plastic storage boxes on high clost shelves!

Once he's a bit older, I'll probably turn it into a bad again. 

This was my second project that I completed to go along with the Daybed With Three Trundle Drawers For Storage that I made for my son.

The original plans for this bed state that you need three 1 x 12 x 8's, but you actually need 4. The two middle 42 3/4" boards on the inside are missing from the cut list, but you can see them in the diagram.

I am so happy with the way this turned out! It was a little more challenging with the wider width boards--I had to force them on the line because they weren't perfectly straight. But overall, I am very happy with this.

When I drilled the holes for the shelf pins using the Kreg shelf pin jig, I used the 1" inset on the outside 2 columns, and the 2" inset on the center column. This way I avoided have holes that were drilled all the way through the board.

Between this and the storage daybed, I have really freed up so much space in my son's small bedroom! Happy building!

I used three 2x12s for the top and 4x4s for the legs. Everything else pretty much the same.  Final table size 36"x60". Longest/hardest part was sanding and staining

My husband and I built this counter height with specs of 351/2" high x 25" wide x 48" long. We are using it in our kitchen as a prep island.

Followed the plans to build this.

I used the following pully from McMaster (if you don't have an account, you might know a friend or someone who does):

https://www.mcmaster.com/#3434t116/=162dxqq

I've attached prints for the barn door stuff I made and thought it would be nice to share. 

Thanks!

My first ever project. Gave it to my parents as Christmas gift. I had a lot of fun building it. Next time I will go easier on wood glue, because some areas that glue got squeezed out did not get stained.
Next project - corner cupboard.

A simple headboard with new pine, distressed to resemble worn barn wood or other reclaimed lumber.  I used a wire brush drill bit to eat away at the soft wood of the outside frame, raising the grain and adding a tremendous amount of texture.  The inside planks are full-width boards that I scored with a circular saw to create false joints.  Each section was stained with a different hue to emulate individual reclaimed planks.  I coated with a layer of semi-gloss polycrylic and then a coat of clear cream wax.

I thought this wood sleigh was so cute, I made it for my mom for Christmas! It turned out cute, it was a good jigsaw exercise! I made it smaller, would probably make it bigger next time, but it's a good size for a table top. She loved it!

Saw a bunch of TV stands in this style on Etsy but they are just WAY too expensive. Found out I could simply order the hairpin legs from Etsy and build one myself. Much cheaper! I chose cedar. It allowed me to go the extra width I wanted (6 foot) and keep the project lightweight. It is a soft wood and prone to scratches and dents, but most of our other furniture is reclaimed and upcycled so I'm not worried about wear and tear. 

Using the Benchmark Octagon table plans found here for the inspiration for our poker table we completely customized the top and modified the base to suit our needs! The dining top cover is yet to be finished but we are definitely thrilled with the result thus far especially seeing as though it was our first ever build! 

My oldest son really wanted a toy cash register, and he loves pretending he has a Bait & Tackle shop. I built the market base where the front side is for "Will's Stop 'n' Shop" and it can be turned around and used for "Wyatt's Bait and Tackle". The countertop holds the cash register and shopping basket perfectly. They are great Shopkeepers!

I added length by adding another "cubby" and increased the height a few inches. There were no instructions for the door, so I made a square like a picture frame the size of the door opening from 1x4's and routed the inner portion of the square with my dremel so I could lay in wainscoting to the inner door. I made the top differently and made it more farmhouse style by attaching four 1x4's together and adding breadboards at the ends. The shelves are movable instead of being attached to give more flexibility in storage. I used 1/4 inch MDF board for the back because it was cheaper than plywood, looked better when painted and was easier to cut in any holes if needed for media equipment without the splinters of plywood.

The top is made of top grade pine (no knots) and stained in Early American with glossy polyurethane. The bottom is cheaper pine boards (with knots) and painted Caffeine Nation from Valspar (my kid picks out all paint color because I will spend hours choosing paint and he takes 30 seconds and his color selections are always perfect for us).

If I had to do it all over, I would have attached five 1x4's for the top instead of four because there just isn't much "lip" to the top. I would definitely change the doors from inset to overlay. Inset doors are more of a farmhouse style but are not forgiving if you are just slightly off. Also, the doors do not shut all the way...they stay open just ever-so-slightly, I think it is due to the hinges, I am not sure. It is not a big deal but it bugs me. I have never had this problem with overlay doors.